thedeatons
05-16-2009, 08:06 PM
I am at St. Anthony right now, and my 250R has not run for 24 hours. Actually, it recently started idling, but only until the pilot clogs.
BOTH PILOT AND MAIN ARE CLOGGING PRETTY MUCH IMMEDIATELY.
I just dumped out over 10 gallons of premix, went into town, got fresh 91 octane from Chevron, and opened a fresh bottle of Red Line 2 stroke racing oil. Mixed it 32:1. SAME PROBLEM!!!!!!!!!!!
Anyone have any idea what is going on? Why would my jets still be clogging? Here is what we have done so far:
-Dumped 4 gallon IMS tank, rinsed it out. Dried it, oured in new gas.
-Checked reeds
-Checked head & cylinder nuts
-Cleaned ALL carb circuits with spray cleaner, then used compressed air to spray out all the circuits.
-Installed new fuel line
-Installed additional fuel filter
-Installed fresh 91 Octane (Chevron) with New jug of Red Line premix oil
-Cleaned out vent hoses/circuitry
-Cleaned DGH needle
-Cleaned 58 Pilot/185 Main (also tried 190 Main)
The quad ran perfectly all day yesterday, and last month at Sand Mt. NV. It just started burbling on me last night when I pulled out of camp (after adding gas), ad hasn't run since. I have quarantined four full jugs of gas, and went into town to get fresh gas. SAME PROBLEM......
Two more days here, and I would like to ride this thing.
HELP!
(PLEASE READ THE WHOLE POST BEFORE TELLING ME TO JUST CLEAN MY JETS. WE HAVE BEEN VERY METHODICAL ALL DAY WITH THIS, AND ARE STUMPED. THE JETS JUST KEEP CLOGGING. DON'T GET TOO CAUGHT UP WITH MY SETUP, BECAUSE THE BIKE HAS BEEN RUNNING PERFECTLY UNTIL NOW WITH NO SETUP CHANGES)
IF YOU CAN HELP ASAP PLEASE CALL ME!!!
BOTH PILOT AND MAIN ARE CLOGGING PRETTY MUCH IMMEDIATELY.
I just dumped out over 10 gallons of premix, went into town, got fresh 91 octane from Chevron, and opened a fresh bottle of Red Line 2 stroke racing oil. Mixed it 32:1. SAME PROBLEM!!!!!!!!!!!
Anyone have any idea what is going on? Why would my jets still be clogging? Here is what we have done so far:
-Dumped 4 gallon IMS tank, rinsed it out. Dried it, oured in new gas.
-Checked reeds
-Checked head & cylinder nuts
-Cleaned ALL carb circuits with spray cleaner, then used compressed air to spray out all the circuits.
-Installed new fuel line
-Installed additional fuel filter
-Installed fresh 91 Octane (Chevron) with New jug of Red Line premix oil
-Cleaned out vent hoses/circuitry
-Cleaned DGH needle
-Cleaned 58 Pilot/185 Main (also tried 190 Main)
The quad ran perfectly all day yesterday, and last month at Sand Mt. NV. It just started burbling on me last night when I pulled out of camp (after adding gas), ad hasn't run since. I have quarantined four full jugs of gas, and went into town to get fresh gas. SAME PROBLEM......
Two more days here, and I would like to ride this thing.
HELP!
(PLEASE READ THE WHOLE POST BEFORE TELLING ME TO JUST CLEAN MY JETS. WE HAVE BEEN VERY METHODICAL ALL DAY WITH THIS, AND ARE STUMPED. THE JETS JUST KEEP CLOGGING. DON'T GET TOO CAUGHT UP WITH MY SETUP, BECAUSE THE BIKE HAS BEEN RUNNING PERFECTLY UNTIL NOW WITH NO SETUP CHANGES)
IF YOU CAN HELP ASAP PLEASE CALL ME!!!