19" front tires

[rider250ex]

hey i e-mailed my local honda shop yesterday and asked them if they had any 19" razr mx or holeshot mx front tires in stock or if not in stock could they order them. they e-mailed me back today saying that they have none in stock and they do not have a listing for them. they also said that they are not atv designs. i am confused. does anyone have anyclue what they r talkin about.

[Pappy]

the average dealer knows how to open and close the store....not very many are gonna know about racing or parts for racing. contact someone like K&K atv and ask them about the front radials they sell. (others sell them too) maxxis also sells a 19" front tire designed for mx....so does ITP.

[rider250ex]

i was lookin at some raidals from james luckey, but what r they talkin about when they say the size is 145x10 and 19" tall. doesnt sound like it will fit on stock rims for some reason.:confused:

[Pappy]

the 145 is a metric measurement...not U.S. standard. i do believe they will fit on a standard front rim....anyone??

[stocktires]

Are you syre Maxxis makes a 19" mx front? I've never seen a listing for one, only 20" fronts :confused:

[stocktires]

145 sounds about right for a quad rim. Car tires are like 285 on a 8.5" rim (VERY roughly), so that would be like 145 for about a 4.5" wide wheel.
Thats a guess though

[Pappy]

Originally posted by stocktires
Are you syre Maxxis makes a 19" mx front? I've never seen a listing for one, only 20" fronts :confused:
i thought thier new mx front was listed as 19 "? it may be 20....sure dont look like it:p my bad if its a 20"

[oynot400]

I have the Razor MX front on mine. I do believe they are 19". I got them from Rocky Mountain Atv. They are a good tire. ;)

[rider250ex]

hey does ne1 know if 19x6x10 will fit on stock rims. i know it is one inch smaller but i was just wonder if they do. if not does ne1 know of ne 19 or 20" fronts that will fit on stock.

[DaveEX7]

of course they'l fit.... i went 2 inches smaller and they still fit

[stocktires]

Purty much all (99%) front tires are made for 10" wheels, and the stockers are 10".

[rider250ex]

i was talkin about how the tires are only 6 wide. the stockers are 7 wide and i didnt know if they will fit because they are 1 in skinnier

[stocktires]

they should be perfectly fine :)

[Sparks425Ex]

Stock front rims are not 7inches wide.They are 5.5 inches wide. Radials are not supposed to go on stock rims but they fit. The stock rim is also +4+1.5 offset. Radials are a pain to ge on stock rims but will work. They have alot of side wall sticking out which can be dangerous if you are ridig in the woods.

[TravEX]

Originally posted by rider250ex
i was lookin at some raidals from james luckey, but what r they talkin about when they say the size is 145x10 and 19" tall. doesnt sound like it will fit on stock rims for some reason.:confused:

yes they will fit your stock wheels,,, i just got these (http://www.tirerack.com/tires/tires.jsp?tireMake=Kumho&tireModel=756&vehicleSearch=false&partnum=4R0756) and put them on an extra set of stock front wheels that i have, they work great,,,i haven't grooved them yet and don't know if i will since i don't race,,,the Tire Rack measuremant says that they are 19.4" tall, but on my quad they are only 18" tall,,,later

[TravEX]

Originally posted by NACS425Ex
Radials are a pain to ge on stock rims but will work.

i can vouch for that!,,,one of mine went on ok, but the other was a pain, i had to take it to a mechanic buddy and he had to pack the area between the tire and wheel with tire compound stuff (looked like axle grease) to get the tire to take air and bead out,,,your best bet might be to use ether and blow em out on the wheel (make sure the valve core is out of the stem!),,later

[bman's 02 300ex]

Originally posted by Pappy
the 145 is a metric measurement...not U.S. standard. i do believe they will fit on a standard front rim....anyone??



as long as it is a 10in rim it will......

[rider250ex]

hey travex do you have ne pics of those tires???

[TravEX]

not yet, i'll try to get some soon,,,

[spincr4hire]

145mm=5.7inches
25.4mm in an inch....