PDA

View Full Version : Blowing Antifreeze



3racers
05-12-2009, 06:37 PM
Looking for some help got a apex 90 thats blowing antifreeze out of overflow bottle. As long as there is antifreeze in raditor and bottle seems like its not overheating but losing antifreeze from bottle.

aaamx
05-12-2009, 07:14 PM
is it a constant flow or like puff puff puff?

3racers
05-12-2009, 07:22 PM
just a puff puff ran it in a half hour race lost aleast half of fluid in system

3racers
05-12-2009, 07:31 PM
guy I got bike from said he added a piece of hose inside of bottle does that matter what should be inside of bottle? Hose 3 or 4 inches long or no hose?

aaamx
05-12-2009, 08:09 PM
the hose should reach down in the bottle to the fluid so when the quad needs fluid it can suck it back i think? lol but first how does it run? im wondering if the head o-ring is leaking under compression.

gocroom
05-13-2009, 05:37 PM
when I purchased mine it did the same thing I found out the hose to the pump was on backwards and was pinched,also I found out dc motorsorts is also workin to make a billet pump impeller

3racers
05-13-2009, 09:10 PM
it runs good checked comp. got about 220 lbs. it has the copper oring gasket could head gasket leak and still have good comp.?

JAG Motosports
05-13-2009, 09:57 PM
Originally posted by 3racers
checked comp. got about 220 lbs.

:eek2:

CORE
05-19-2009, 06:19 AM
I had the same problem with a brand new apex 90cc, ended up being the larger o-ring, letting the hot engine gases into the water jacket and boiling it.

3racers
05-19-2009, 06:46 PM
Thanks Core, Was lookin at this weekeng bottle smelled like exhust gas or oil. Ordered head gasket today hope thats it.