Quickshot accelerator pump issue

[Sweendogie]

i just bought a wirtz quickshot accelerator pump... i put it on and it wouldnt fire up unless i give it some throttle and when it does fire it wont idle, should it be able to run right without any adjusting? the web site says to "adjust the timing screw 2.5 mm for accelerator pump adjustments found inside the plastic cover" thats exactly what it says and i have no idea what it means... i know where the pump adjustment is i just dont know how much to adjust it and i dont know whether to adjust it inward or outward or if i should even have to do it... any help is appreciated..... here is the website click on the installation instructions and look at step 8... thanks

Wirtz (http://www.wirtz.net/2/product_detail.php?producto_id=237)

[Ryan]

Well when you install these covers, they recommend turning the low speed fuel screw out 1/4-1/2 turn from the stock setting.... So 1 1/4 - 1 1/2 turns out.

As for checking the gap for the timing screw, The gap you check lies right at the end of the timing screw. Your kit should actually include that tool to check it.