450r a arms

[bigbad400]

would 450r a arms fit an ex what are the differences, could they be easily modded to fit? having trouble finding a set of decent stock a arms(400ex) and 250rs could fit but they need to be chopped down on the mounts, thaught i would ask around and see if anything else fits befor i buy expensive used stockers.


i only NEED the left a arms, hub too if you got one. anybody with takeoffs or some helpful advice would be sweet. thanks fellas.

[honda400ex2003]

I dont think they fit easily off hand. i think they are a bit wider at the mounts. i guess you could get them and redo all of the mounts but aftermarket would better. i would check out the parts for sale section for the arms you need, once in a while you can find a stock set cheap. good luck , steve

[kilgoja]

probably would be better to go ahead and spend the money to get an a-arm kit that comes with new front shocks

[Kevslatvin]

Have you tried Ebay. If you watch you may pick up a stock set for a decent price. Depending on what you consider decent. A new upper arm from my local dealer is $90.00. You should be able to get a whole set for that or less from Ebay. Sometimes hubs too.

[brian76708]

no 450r a arms do not fit on the 400ex the a arms are to wide to fit so you would have to move the whole bracket over.

[Zeb400EX]

I have both arms for the left side (fly wheel side) with the spindle and hub. All of which are still put together. I'll do $85 shipped. Just pm me if you want them. I have the right side too(clutch side).

[bigbad400]

Originally posted by kilgoja
probably would be better to go ahead and spend the money to get an a-arm kit that comes with new front shocks

just got the ELKA recs, i have the diamond j kit, dont need wider need stock. but good advice had i not just baught all that.