boysen quick shot 2

[2002TRX400ex]

Anyone have anything to say about the boysen quick shot 2 is it worth it. Looking to add a liitle to the quad to beat an LTR let me know what ya think. I have a 2006 YFZ 450 mods in sig my friend has a ltr 450 with cherry bomb thats all.

[daddio]

Do the cam mod and you'll have the LTR covered.

The QS2 does the same thing as changing the leak jet. It removed the "bog" but doesn't really make it "faster".

[ndevall]

http://yfz450.theatvchannel.com/invision/index.php?s=&showtopic=84985&view=findpost&p=681994

After the cam mod do this tip. If you are jetted correctly it will improve the throttle response drastically. Hint: Don't use an O-ring, try a small zip-tie or some small diameter wire.

[2002TRX400ex]

Thank you for all the replies I ordered the quickshot 2 yesturday and im going to do the carb o ring mod with zip tie also. I am just a little scared about the jetting never done that before but i got a few good hints. Thanks again. -Brian

[Ryan]

Before I did the cam mod (mods in sig), I was still beating stock ltr's by a quad length or so. I haven't got a run in yet with the cam mod against an LTR, but I know for sure its got alot more pep!

BTW, I don't think the zip tie trick will be necessary if you are gonna install the boyseen quickshot.

[2002TRX400ex]

oh really anyone can tell me for sure if its necessary or not

[ndevall]

In most cases the quick shot has no effect on fixing the bogging problem. The most common cure is doing the zip tye mod and installing a 35 leak jet. Of course you still need to jet your bike. Yes the cam mod is an awesome free mod and will help your machine make much more power. All of this is from my personal experience.

[2002TRX400ex]

Thanks that is the kind of feedback that im looking for i plan on doin the cam mod this winter as stated above does the zip tie thing work with out the cam mod also I was planning on trying it this weekend and getting jets to play with

[ndevall]

Yes the zip tye mod will work with or without the cam mod. Basically what the zip tye mod does is to activate the accelerator pump at the same time the throttle is cracked open. Based on your sig I would start with a 45 pilot jet and try a 158, 160, 162, and 165 main jets. While you are at the dealership pick up a 35 leak jet. That used with the ziptye mod will really help the off throttle response.

[Ryan]

Originally posted by ndevall
In most cases the quick shot has no effect on fixing the bogging problem. The most common cure is doing the zip tye mod and installing a 35 leak jet. Of course you still need to jet your bike. Yes the cam mod is an awesome free mod and will help your machine make much more power. All of this is from my personal experience.

I disagree... I had a terrible bog problem off the bottom, and the quickshot fixed it right up, I haven't hit that bog spot since I installed it.

theres a bunch of ways of fixing this problem.... The cheapest way would obviously be the zip-tie trick.