is it possible?

[IRISH-RACER-14]

is it possible to put a clutch reverse cable on a asv hot start?

[timmersam]

I am going to have to say thats one of those things you have to try for yourself because its so specific.

Sam

[IRISH-RACER-14]

i no but i dont want to go and waste money on a asv lever

[ZSNOW]

im pretty sure hetrick makes a relocating bracket so that you don't have to use the reverse cable..

[ZSNOW]

www.atvriders.com/articles/reverse300ex.html

[IRISH-RACER-14]

Originally posted by ZSNOW
www.atvriders.com/articles/reverse300ex.html woooo thanks man... now i can go off and buy my asvs:D:D do you have asvs on your 300ex

[ZSNOW]

yes, i have their shorty clutch lever and the brake lever both in red. but i think mine was called a C5 because it has a hotstart on it.

[IRISH-RACER-14]

u can get hotstart on all models just the c5 have a longer warranty and is that a 450r brake lever yes?

[ZSNOW]

yes it is a 450r brake lever

[bobizzle]

can yall post some picture, i would like to see the way you installed it

[IRISH-RACER-14]

im scared that ill ruin my tranny

[ZSNOW]

by doing what?

[IRISH-RACER-14]

if i tried putting it in reverse when in a forward gear,

[bobizzle]

you have to be in neutral to shif in reverse

[IRISH-RACER-14]

ya buut when using that mod soum1 can pull up the lever and f''k up my tranny

[bobizzle]

no offense to anyone, but thas why i almost never let anyone ride my quad, unless they know everything about it. or they have a quad of there own.

i know what you mean tho. people will ride and **** it up and swear they didnt do it. and then they wont wanna pay for it.

[Tommy Warren]

you can also take the handle for the reverse off and put a second gear shifter on it instead so you just kick the shifter down instead of reaching over every time I have DG nerfs and the shifter doesn't interfere at all.

[IRISH-RACER-14]

i dont wanna go into that. i know it can be done

i think ill just do it the way ZSNOW showed me

[Tommy Warren]

I forget which wires I cut but I didn't have to install the chain and I don't need to push the button for reverse just cut the right wires.

[bobizzle]

i had found a little shift lever on ebay that is made for the the reverse gear.

[Tommy Warren]

I wonder what the difference between the custom(ebay) one and the stock one that I use is. probably just a longer length.

[bobizzle]

its a little longer and and the pad is square and wide. prob not tht much diff. you have a pic to see what yours looke like.

[Tommy Warren]

no sorry my camera is out of commission. Its just the stock shifter from a 300ex so I have 2 exactly the same.

[bobizzle]

i gotcha, the reverse sticks out a lil further than the gear shift pedal, correct?

[Tommy Warren]

yeah its 2-3 inches forward ans 1-2 inches lower.

[bobizzle]

do you eva have any problems with the position it is in, or would you suggest to do it on otha bikes

[Tommy Warren]

no like I said it doesn't interfere with the nerfs or the shifter. It may look kind of goofy but it works great. especially on my bike because my idle screw fell apart inside the carb and I have to keep the rpms up when shifting into reverse. Pushing a little red button and reaching over the seat to shift in reverse is the dumbest design I have ever came across.:rolleyes:

[bobizzle]

imma have to check it out on mine and see how i like it.