Clutch install on a KFX 400.... difficult? Best clutch?

[CGCinc]

I'm thinkink I might need a new clutch on my KFX 400... grabs fine for now but its out of adjustment so I'd rather be safe than sorry.

Is it as easy as pulling all the plates out and replacing with new in the same order they came out?

Whats a good neame on a clutch?

[airmobile101]

EBC DIRT RACER

[bart550255]

I would just use it till it starts slipping since you won't destroy anythig that doesn't get replaced anyway.

I have pulled a clutch to get to the oil pump drive gear (sheared teeth after the pump seized from foriegn object). It was easy as you say, remove the clutch springs and remove/replace the friction plates and pressure plates. Add a new a gasket and you are done.

06 and 07 z400

[CGCinc]

Originally posted by bart550255
I would just use it till it starts slipping since you won't destroy anythig that doesn't get replaced anyway.

I have pulled a clutch to get to the oil pump drive gear (sheared teeth after the pump seized from foriegn object). It was easy as you say, remove the clutch springs and remove/replace the friction plates and pressure plates. Add a new a gasket and you are done.

06 and 07 z400

I'm gonna wait till closer to July.... Going down to Hatfield/McCoy trails in West Virginia so I want it to be in top shape for that...

[oilguy]

EBC