for all the expert !!!!!!

[andiboy123]

today my ds start leakin fuel from the pump, non is not the pump its the seal aroun it betwen the tank and the pump.
do i have to remove the cross tube to take the tank out?

[grannysleeper]

Just pulled my tank out to put on the heat tape... It is a tight fit!!! You have to pull BOTH side rails (the ones with the ALTEC stickers on them), which are only held on by 3 bolts each, but you have to take the top bolts for the front shocks to get enough room to fit a socket on the front rail bolts.