Installing Bearing Carrier 01 400ex

[alberto]

Installing Bearing Carrier 01 400ex


I WILL BE REINSTALLING MY NEW BEARING CARRIER NEXT WEEKEND. I READ PAPPY'S THREAD ON REMOVING IT AND IT WAS VERY HELPFUL. I AM ASSUMING THAT YOU JUST REVERSE THE ORDER WHEN REINSTALLING THE CARRIER. I WOULD JUST LIKE TO KNOW ANY TRICKS OF THE TRADE ON THE REINSTALLATION OF THE CARRIER. ANY HELP YOU CAN OFFER WOULD TRUELY BE APPRECIATED.


__________________

[honda400ex2003]

Just reverse everything and it should go smooth. I would put some antiseize on it so it does not stick in there when you go to take it out next time around. steve

[honda400ex2003]

heres the write up i did to get it out

http://www.exriders.com/vbb/showthread.php?s=&threadid=390612

if you want to read it or something but since you read pappys you can do that one in reverse too. steve

[svtkidd23]

its easy i got a lonestar bearing carrier.. twin row.. ebay 120 bucks new..!

and it put it in.. big diff!!

but i shattered my old carrier!! on a step up

[alberto]

thank you guys for the info. How much grease did you use? Did you just grease the carrier or the swinger too? Did you replace the "O-rings"? I think the reinstall should be easy. I just dont want to forget anything.

[honda400ex2003]

i did grease on both and did replace the o-rings too since they came in my kit. if you got it out you should have no problems getting it in. steve