PDA

View Full Version : acceleration help ??



exrider123
12-31-2002, 12:04 PM
Im looking for more acceleration...what do you recommend i only have a e-series with 12 disks...is there anything i can do to the pipe to add more acceleration like take out diks i dont care about top end...thanks

hotrodhonda400
12-31-2002, 12:15 PM
first off try taking out 4 or 5 disks on your pipe it will give you more torque and get you going quiker not faster torque = acceleration and horsepower comes into play at the top of the powere band, If you do this and still are not satisfied then go 1 tooth smaller on you countershaft sprocket.

12-31-2002, 01:20 PM
get a cam that is good increase in bottom end or you can get a kn air filter, this seemed to help me out a bit

RAPTORAZ
12-31-2002, 05:37 PM
Start by grinding out the welds in the stock header, then bump it up to 18 discs, lose the airbox lid, move the needle up one notch, and put in a 165 main (assuming you're somewhere near sea level). You'll see a big improvement from where you are now.