Blizzard's XC Build

[Blizzard24]

The finishing touches are pretty much done so I thought I would share some of the mods and some things that were done.
Here is a list of what was done and pics below.

08 DS450X
SUSPENSION:
Fox Evol DCS Front shocks
Fox Podium X DCS Rear shock

CONTROLS:
Fasst Flexx 14* quad low bend bars
Tag Metals +1 stem w 1 1/8" clamp
W.E.R. Stabilizer w custom mount
ASV Levers
Powermadd Hand guards w wraps

BRAKES:
Streamline Front brakelines
DP Rear pads

ENGINE:
HMF Complete Exhaust
BRP Race ECU
Pink Wire Mod
Hinson Clutch Basket
09 Clutch Case
09 Clutch hub w 9th plate

DRIVE:
ITP GNCC Tires F-21X7X10, R-20X11X9
Hedstrom Playground balls
Douglas Conventional Beadlocks
BRP Twin Row Bearing Carrier

PROTECTION:
BRP Coil Antivibration Mounts
BRP Rear Frame Support
BRP Radiator Louver kit
BRP Front Bumper
BRP Chassis Skid
BRP Brake Rotor Guard
Warnert Racing Sprocket Guard
BRP Nerf Bars

EXTRAS:
Pro Armor Kill Switch
YZ Start Button
Engine Ice Coolant
09 Flywheel bolt update
09 Engine Mount Update
BRM Offroad Number plates



This is what it started out as
http://i264.photobucket.com/albums/ii164/Blizzardracing/CanAm3-1.jpg

WER Stablizer w Custom Mount
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0064.jpg

Hinson Basket
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0022.jpg

Tag Stem and Rear beadlocks
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0023.jpg

Sprocket and Rotor Guards
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0008-2.jpg

[Blizzard24]

Better pic of the Rotor guard
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0009-2.jpg

Louver Kit
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0014.jpg

Front Suspension
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0015.jpg

Rear Suspension
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0011-1.jpg

And as she sits now, I just need to button up the plastics and clean her up.
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0019.jpg

I will have pics of the complete project in the next day or two

[Blizzard24]

I do want to thank some companies that are supporting me this year and made this possible.

Can Am Atvs
Fox Racing Shox
ASV Inventions
ITP Tires
DP Brakes
Regina Chains
Engine Ice
Smith Optics
Six Six One
Tag Metals
Oneal MX Clothing
Powermadd

[dbkbushwacker]

Any pics of the pipe?

[Blizzard24]

Hmm... I just looked through the pics I have and nothing shows thepipe, I will make sure I get a pic of the pipe when I post the finished quad.

[spanky101]

Looks great man! I cant wait to see it!

[Mr. Big Time]

Blizzard,
I sent you a pm.

[crixal]

nice bike, man.

[ProConcept]

What exactly are the differences the race ecu has over the stock ecu??

[Blizzard24]

Originally posted by ProConcept
What exactly are the differences the race ecu has over the stock ecu??

I know the limp mode is removed but I am not sure of the other differences, if there are any.

[X400EX]

I'm very interested in that rotor and sprocket guard. Where did you get them?

[Blizzard24]

Originally posted by X400EX
I'm very interested in that rotor and sprocket guard. Where did you get them?

The rotor guard is a BRP Race part and the Sprocket guard is from Warnert Racing.

[ProConcept]

Originally posted by Blizzard24
The rotor guard is a BRP Race part and the Sprocket guard is from Warnert Racing. Yeah I had to do quite a bit of research to find the sprocket guard. I remember seeing it on the gncc bikes and ended up calling Warnert directly to see who the hell made the piece. Found out and ordered it up, but I still wish we had more aftermarket support for this thing.

[ltr311]

Originally posted by ProConcept
What exactly are the differences the race ecu has over the stock ecu??

Im curious about this also??

[spanky101]

Like he has said, the limp mode is removed. Im sure if you called Warrnet racing they would be able to help you out more

[Blizzard24]

Here are the final pics.
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0001.jpg
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_0002.jpg
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_00092.jpg
http://i264.photobucket.com/albums/ii164/Blizzardracing/IMG_00072.jpg

[crixal]

looks nice, bliz. nice build.

[Flynbryan19]

Quad looks good. I would get some louvers on that radiator before you hit a gncc though. It'll get packed full of mud with the quickness.

[Blizzard24]

Originally posted by Flynbryan19
Quad looks good. I would get some louvers on that radiator before you hit a gncc though. It'll get packed full of mud with the quickness.

Take a look at the 1st pic on the finished product... the louvers are on there.

[BamBam730]

Blizzard, where did you get the sprocket and rotor guards on your quad? I would like to get the same ones.

[joeyds450x]

blizzard, how much you pay for the fox floats? i wish i could find a set for less than 1400 lol

[cdoskocil9]

They all run around 1400 but they are awesome....

[joeyds450x]

Originally posted by cdoskocil9
They all run around 1400 but they are awesome....

ahh that sucks i wish i could afford that! lol maybe ill come across a cheaper used set..

[crixal]

outtagas has a set for sale on ebay. he might have 1200 on them, they are long travel.

[joeyds450x]

ya i saw them on there but i have the +2 standard travel so i could use the stock shocks untill i upgrade.. i might have them revalved for the longer a arms and just het that hygear twisted spring kit, has anybody tryed this?

[Blizzard24]

Originally posted by BamBam730
Blizzard, where did you get the sprocket and rotor guards on your quad? I would like to get the same ones.

The rotor guard is a Can Am Race part
The sprocket guard is from Warnert Racing

[Blizzard24]

Originally posted by joeyds450x
blizzard, how much you pay for the fox floats? i wish i could find a set for less than 1400 lol

They retail for $1495, I am sure you can find them below retail but even used they are going to be over $1000.
You can try Cernics, I heard they have some good prices but I am not sure.

[TNT]

Nice looking bike! So I don't have to cut the plastic to get the louvers in looks like? about ready for the final touches.

[Blizzard24]

Terry, you do have to cut the plastics, you have to notch the side panels and cut a straight line back... the directions were perfect so just follow them.

[TNT]

Originally posted by Blizzard24
Terry, you do have to cut the plastics, you have to notch the side panels and cut a straight line back... the directions were perfect so just follow them.

I got the race team louvers and didn't get any directions. Guess I better call and see if I can get em. :confused:

[Blizzard24]

Shoot me a fax number, I can fax them over this evening.

[BamBam730]

Originally posted by Blizzard24
The rotor guard is a Can Am Race part
The sprocket guard is from Warnert Racing

Thanks for the information.