High Flow, Larger Intake Boots?

[ameier5051]

Well, like many other people with 250Rs I am running a 38mm PWK carb. After boiling my intake boot to put it on the carb it wound up cracking a little.

Recently I have been considering getting the oversized carb intake boot and boot from carb to airbox. Anyway, I don't want to spend over 100 bucks for the two of these. This seems like a huge rip off.

Does anyone else know where you can get these parts?

[matt250r21]

It is an LT 500 air boot you are looking for. Couple things to think about. 1) Mainly used for no link set ups, stock link and CR500 link is not a good fit for the LT 500 boot. 2) Fits 38 mm carbs great, dose not fit the OEM 250R airbox without an adapter (a piece of 4 inch CPVC pipe epoxed to the airbox works good as an adapter. If you want an LT 500 boot I have one for sale, $40 shipped. I also have a brand new OEM 86 TRX250R airboot I would be willing to sell. New OEM TRX250R boots will fit 38 or 39 mm carbs with very little work and fit right. This is what I run on my CR500 link Laeger.

[Swiper77]

I have New UM carb intake boot for oversized carbs and a LT500 boot with aluminum spacer bought off ebay I'll sell shipped for $85. I didn't go with the LT boot cause I didnt like how it fit.