Difficult to put neutral gear

[don_carallo]

For 2 weeks ago it's difficul to put the neutral gear on my '05 450r.

I thought that it could be because of the gearbox oil, but i changed it and it continues the same way.

What's the problem?.

Thanks.

[Scro]

If it's running, give it a little gas while you are trying to find it. It will fall right in. Don't ask why, cause I have no clue:p

[fastredrider44]

Clutch basket is getting wore out. Make sure to keep the clutches in adjustment. They're very sensitive.

[rooster300ex]

Originally posted by Scro
If it's running, give it a little gas while you are trying to find it. It will fall right in. Don't ask why, cause I have no clue:p

Thats what I do with my 300ex, and it slips right in.

[don_carallo]

While running it puts into easily.

The problem is when stopped.

Maybe the problem is the clutch. I had to adjust the clutch lever.

[Turboderf]

Originally posted by fastredrider44
Clutch basket is getting wore out. Make sure to keep the clutches in adjustment. They're very sensitive.
the clutch basket is getting groves init and the clutch plates are sticking on the basket

[chadbarger18]

take the tension off the chain it just falls in

[industry48]

either the basket or the shift shaft; part of the shift shaft is hollow and I have bent more than a few of them and it doesn't take much to throw it off.

[Sjorge450R]

rock the quad to take pressure off the internals and the chain. Then try....

[BlaineKaiser450]

Originally posted by Sjorge300EX
rock the quad to take pressure off the internals and the chain. Then try.... yep! ALWAYS works for me!