maddogmike119
04-10-2009, 11:41 AM
Cobra project forsale if your interested.
2006 Cobra frame that was sandblasted and is bare. Frame was gusseted and was getting ready to be fitted with a KX 65 motor. This frame has the solid motor mounts in it. Does not have the removable ones. Motor mounts have not been modified yet for the kx 65 motor.
Included with this project is:
1- frame
1-new gas tank, bracket, petcock and cap.
1-new seat
1-DC anti fade steering stem and 400ex support bracket.(does not include anti fade rubbers or clamps)
1-new lower steering stem bushing
1-set of JB standard length A arms that were freshly powder coated satin black with brand new nuts and bolts.
1-set of Jb tie rods and ball joints
1-set of 400ex front spindles, front brakes and hubs. (hubs need new bearings and brake pads. No brake lines are included)
1- new Rath front bumber
1- new set of Rath nerf bars
1- new Rath grab bar
1-CR 85 rear brake pedal, master cylinder and rear brake line.
1- new bearing carrier
1- new style axle with brake hub, rotor, sprocket hub and sprocket. All key ways and nuts and bolts included.
1- set of rear wheel hubs and lug nuts
1- Fox rear shock
1- set of fox front shocks
1- 2005 kx 65 motor complete with electrics and carb, but motor needs to be rebuilt.
1-2007 kx 65 bottom end that needs rebuilding and spare stock cylinder.
1-Pro circuit pipe modified to fit the cobra frame and silencer
1- swing arm bolt and nut
Things you will need to finish the project:
Rear fenders
Front fenders(i will supply a gen x front fender assembly for a discounted price)
Front wheels and tires
Rear wheels and tires
Front brake lines, brake levers, clutch lever, throttle cable, handle bars, grips, chain.
Swing arm
Pictures of everything are available per request. Email me for pricing maddogmike119@hotmail.com
Son has lost interest in riding the cobra.
2006 Cobra frame that was sandblasted and is bare. Frame was gusseted and was getting ready to be fitted with a KX 65 motor. This frame has the solid motor mounts in it. Does not have the removable ones. Motor mounts have not been modified yet for the kx 65 motor.
Included with this project is:
1- frame
1-new gas tank, bracket, petcock and cap.
1-new seat
1-DC anti fade steering stem and 400ex support bracket.(does not include anti fade rubbers or clamps)
1-new lower steering stem bushing
1-set of JB standard length A arms that were freshly powder coated satin black with brand new nuts and bolts.
1-set of Jb tie rods and ball joints
1-set of 400ex front spindles, front brakes and hubs. (hubs need new bearings and brake pads. No brake lines are included)
1- new Rath front bumber
1- new set of Rath nerf bars
1- new Rath grab bar
1-CR 85 rear brake pedal, master cylinder and rear brake line.
1- new bearing carrier
1- new style axle with brake hub, rotor, sprocket hub and sprocket. All key ways and nuts and bolts included.
1- set of rear wheel hubs and lug nuts
1- Fox rear shock
1- set of fox front shocks
1- 2005 kx 65 motor complete with electrics and carb, but motor needs to be rebuilt.
1-2007 kx 65 bottom end that needs rebuilding and spare stock cylinder.
1-Pro circuit pipe modified to fit the cobra frame and silencer
1- swing arm bolt and nut
Things you will need to finish the project:
Rear fenders
Front fenders(i will supply a gen x front fender assembly for a discounted price)
Front wheels and tires
Rear wheels and tires
Front brake lines, brake levers, clutch lever, throttle cable, handle bars, grips, chain.
Swing arm
Pictures of everything are available per request. Email me for pricing maddogmike119@hotmail.com
Son has lost interest in riding the cobra.