bk111
04-07-2009, 07:31 PM
I just got my motor rebuilt with new valves, crank and piston. While getting rebuilt, i purchased a new hmf BB carbon fiber slip on. I am not sure where to go with the jetting. The quad runs perfect with the stock pipe with hrc tip with 185 main. The quad is a 2004 w/ hrc kit. I put the BB pipe on and at about 75-85% throttle, the motor spits and sputters like it's on the limiter. I know it's not. I put in a 195 with little or no change. I have the hrc lid on. I also put a 50 pilot in w/ 2.5 turns out on the screw. Should I pull the lid off completely. I'm not even sure whether it's lean or rich. Need help soon. Thanks for all advice.