Stoke88
04-07-2009, 01:45 PM
It all started with a slightly bent rotor, a cracked rotor hub spoke and bad pads. I replaced all these parts with brand new ones but the rotor is rubbing the inside of the caliper with no pads in it( not while riding, just spinning it on the stand). If I were to put pads in the would wear away in a minuite. When I took the old hub and rotor off I noticed that the rotor bolts were rubbing on the caliper bracket pretty bad. I assume it was because of the cracked hub spoke because its not rubbing anymore. I also noticed that part of my carrier broke off. Its on the outside of where the snap ring holds the carrier into the swingarm. I was wondering if that threw off any kind of spacing but I don't want to drop $150 on something that might not be the problem. Its kind of hard to explain becuase I don't know really whats wrong here. Anybody have any clue?