PDA

View Full Version : Battery Problem



Turboderf
04-07-2009, 06:36 AM
I have 2 06 450ers that are slow to crank battery about ayear old i hook up a jumper wire to a car battery and the starter spins over real good so i would like to put a larger cranking amp battery in the stock battery is 130amp stock i found a 190 cranking amp a little biger to fit i will have make the bracket biger or add two battery has anyone done this thanks for your help

Scro
04-07-2009, 06:59 AM
Add two batteries, and wire them in series so that the starter is getting 24 volts. Kiss your starting problems goodbye.:p

Turboderf
04-12-2009, 08:19 PM
well i think i fixed my starting problem i put in a BIGGER battery in went from a 130 cc amps to 190 cc seems good for now Starter spins very fast

k265r
04-12-2009, 10:44 PM
check your compression and your valves.

450rdr424
04-13-2009, 01:27 PM
how much larger is that 190cc battery? what mod did you have to do to the batter holder?

Turboderf
04-13-2009, 02:40 PM
i cut the back side of the battery box off and welded a small peace of angle so it dont slide back its well worth the work that starter spins like crazy i just got sick of slow cranking battery cost about 150 ytz10s you also have tomake a longer wire for the postive side and relocate the ground to the starter