G-Force Redemption

[DirtMonkey]

I posted the results under the original thread (Wrong Decision) but I want to make sure everyone knows that the replacement G-Force axle that I recieved from RM held up to bigger jumps and a lot harder landings. I was hearing that its luck of the draw with these axles and on my second one so far so good.

[DirtMonkey]

heres a pic of the track I was at,Atmore MX

[F-16Guy]

I must be one of the lucky ones, too. Mine has been great, and I've raced some WORCS races and just generally beat the crap out of it. I just checked my hubs the other day and they're still tight. $200 well spent, so far.

Mines fine but my hubs keep getting a lil bit loose. I'm bout to throw a lock washer on them. Or get a breaker bar and torque them *******s down tight.

[honda400ex2003]

good to hear you got a new one and it is working good for you. steve

[DirtMonkey]

Thanks Steve, one good thing that came from bending the first one is now I can change out an axle in my sleep!:D

[honda400ex2003]

nice, it is fun to be able to take it apart fast. Saturday night, I took my whole side case off, took my clutch apart, and had it back together in about 1 hr. and 10 minutes with messing around. Aure is fun to check it and make sure it is good and not need half a day to do it. steve

[hondaking52]

Originally posted by SuicideMFNdoors
Mines fine but my hubs keep getting a lil bit loose. I'm bout to throw a lock washer on them. Or get a breaker bar and torque them *******s down tight. hey, ya i think it was you i was tellin about the lock washers? anyhoo mine have been on for a few weeks with the lock washers and there still tight, worth a try.

[Which 450?]

Im 220 lbs, Ive had it on there for a few months. Im just starting to run tracks, so hard landings are a common occurrence. All is well so far, I used red loctite on everything so I haven't had trouble with anything coming apart.

[Wheelie]

I've been running a G-Force for over a year now, and no problems yet. I don't understand how so many people have problems with rear hubs coming loose. I torque mine down to about 100-110 ft-lbs without any lock washers or loc-tite and have yet to experience a hub loosening.

Got a breaker bar and torqued mine down as tight as I could go. So far nothings loose..... fingers crossed...

[440challenger]

I wadded one up pretty good.. not sure how.. maybe landing on one rear wheel first off some play kickers ??? 2nd ones holding up good now it my girls 400. ordered one for my 450 well see how long that last. My buddy has one and all the chrome is peeling off it and hes only riddin with it maybe 3 times

[nskukalek79]

hey Which 450....i couldn't help but notice you ride at breezewood, are you doing their race this year?