450 carb wiring

[wanta450]

what do i do with the two electrical connections on the 04 to 05 450r carb when i put it on the 400ex are the same plugs there or what

[davidw2155]

You don't need em, one is a Throttle position sensor and the other is probably the heater. I just pulled my TPS off and made a little cover for it and then found the right sized bolt for the heater (Don't remember the exact size) and put some Loc-Tite on it and replaced the heater. You also need to block off the hot start hole as well in the same way. Or, if you don't want to go to that trouble you could always just clip 'em, tape 'em, and be done with it. They are of no use on a 400EX.

[n811]

I just cut mine clean off.