PDA

View Full Version : gOt my bearing carrier


born2ride14
04-02-2009, 05:05 PM
And believe i have received the wrong one. I ordered a TRX300ex a carrier with the march savings code and it will not fully go on. axle I tried it on a 450r axle and it went on but was not centered, So i believe it must be for another quad. Let me know if you need any measurements to verify this.
Thanx

Jesse
05Z400rdr
04-02-2009, 06:34 PM
See what letter is engraved into your carrier, and they should be able to tell you right away :macho


Landon
born2ride14
04-02-2009, 06:50 PM
says b but i thought that would stand fo burgard
05Z400rdr
04-02-2009, 09:23 PM
No that's actually the model. Like each model quad that has a different carrier has a different letter on it. They'll let you know then :)
burgard rep
04-05-2009, 07:20 PM
B is the carrier for a 300EX. Do you mean the axle won't go in the whole way or the carrier won't go in the swingarm the whole way?
born2ride14
04-06-2009, 08:12 AM
The 300ex axle will not go into the carrier fully. I am leaving for a cruise today, so ya. I am trying to put a 450r axle in my 300ex. I have a friend that did it and it bolted in, no modifications. The 450r axle fits in the carrier all right but spacers would be needed for it to be centered and for the axle nut to tighten. The 300ex axle does not go in completely. I can still see the surface were the seals should be setting. Is there anyway it could have been mis-marked? Let me know what you think of what could be the problem, Thanx jesse
burgard rep
04-10-2009, 06:59 PM
No it couldn't have been mismarked or all the 300ex carriers would be wrong. Can you post a picture of it?
born2ride14
04-12-2009, 11:35 AM
the axle with the sprocket is a 300ex axle and the other one is a 450r axle
http://i195.photobucket.com/albums/z190/born2ride4/axle001.jpg
http://i195.photobucket.com/albums/z190/born2ride4/axle002.jpg
http://i195.photobucket.com/albums/z190/born2ride4/axle003.jpg
http://i195.photobucket.com/albums/z190/born2ride4/axle004.jpg

http://i195.photobucket.com/albums/z190/born2ride4/axle005.jpg
http://i195.photobucket.com/albums/z190/born2ride4/axle006.jpg
burgard rep
04-14-2009, 08:08 PM
There are numbers on the side of the seal like 50 x 62 x 35. Check to see what they are. I believe the carrier has the wrong seals in it.
born2ride14
04-15-2009, 02:49 PM
The ones in mine are the same as stock 52 62 7
burgard rep
04-16-2009, 03:12 PM
Those are the right seals. I'm at a loss for words now.what is the axle resting against to not allow it to go in the whole way?
born2ride14
04-16-2009, 04:55 PM
i looked before and i couldnt find what it was hitting, i will check again later though
burgard rep
04-20-2009, 07:04 PM
If the 450R axle slides in and the seal rides on it correctly than something is up with your 300ex axle. I don't know for sure but thats all that makes sense at this point let me know what you come up with or what you think of this suggestion.