key relocating

[scrappy3]

I'm putting on some new bars, any suggestions on where I should remount the key and lights?

make a home made mount to put it on the bar clamps. on the hood. under the hood. beside the gas tank. the options are endless.

[k265r]

houser makes a sweet dogbone handlebar clamp that holds your key and lights. if you dont want to spend money i've put the light in the two holes were the stering stem meets the frame. you can still see the lights welll while sitting on the seat.

[scrappy3]

I noticed those two holes but was not sure the lights would fit.ThANKS for the info.

[MAD450r]

Mine only has a temp light, I put that in my barpad for my flexxbars, the key I put into the side panel just in front of the tank. very easy didn't cost anything either ;)http://www.dotphoto.com/SAN1/1F/9C/82/i1F9C82B8-2785-4C2D-AA1B-0D119C4B49DAB9243826.jpg http://www.dotphoto.com/SAN1/B6/C5/4A/iB6C54A9A-FB17-4685-AAD8-4A1D3FED14CEF9EA9588.jpg [IMG]

a bit hard to see but the key is in there and my light is just held in place by the pad, I only cut a slot int he pad and used a razor to cut a backwords c for the light top to fit flush. I jump alot and hammer whoops it hasn't moved yet.

[JJs450r]

some people mount in fender, some in bar pad, some in the hood, i have both of mine mounted under the hood zip tied