well i think im guna shave finders now lol

[crxjarred]

ok i was on some ground that was little sticker then i though and was in 3rd and poped a wheelie and it went right over and roled lol and now my fender is busted there is 2 cracks there but u can only realy see one is there has anybody shaved it this far to where there isnt a crack or a very little one or should i just shave like normal and put a couple zip ties for some stitches lol cus now this fender is bent kinda dosnt look the same as the other
http://i42.photobucket.com/albums/e346/crxjarred/me012.jpg

[crxjarred]

also is there anything i can do to the back dont wana shave alot off just give it a meaner look

[DirtMonkey]

Dont know about the back but you can get a fiberglass repair kit with epoxy resin and cloth for 15 bucks at advanced auto so you can repair it from underneath and then cut it where you want to.

[crxjarred]

well i cant spend anymoney trying to put a new moter in my car before it blows up lol

[honda400ex2003]

plastic welder if you know someone with one otherwise i don't know without glassing it up and sanding it down. steve

[crxjarred]

i dono i want to shave my fenders but i dont like getten muddy and stuff do u get realy muddy without them or is just mainly the back

[honda400ex2003]

i am not sure, mine aren't cut. I would say you will get more spray when in muddy conditions. I know a kid that had his cut on his banshee and he did not get the big clumps while going but if he was on an atv route that was a road in rain or something he would get the spray in the face and body. I think they look cool but that is why I don't cut mine. I'm sure someone knows about this first hand since there are alot of cut fenders on here. Steve

I cut my fenders a few weeks ago. I even added +2 arms when I did this. Its so much better being able to see your tires. I get less or the same as I did before. Its a 4 wheeler. Dont ride in dirt if you dont wanna get it on you.

Also if you do alot of mud boggin your gonna get covered regardless. But I try to avoid mudholes, mudding is for the gay utility/redneck 4 wheelers.

[crxjarred]

yea i try to avoid mud holes too but thats also true dont ride unless u wana get dirty but i think im guna just shave them reg and then just like stitch it up with some zip ties lol guna have some battle woonds i think it looks prity kool if u do it right and not half *** since its just a small area

[honda400ex2003]

It does look cool with them cut. I say cut em. I like the look of the stock ones more than I do cut so I leave mine on. You will get muddy regardless of what you do so it doesn't matter. That is half the fun of going. The other is getting there. Have fun and use a dry erase marker to draw the lines you want to cut first I hear it is easier to do it that way or run some tape where you want to cut then clean them up nice with some fine sand paper or something. Post pics if you do it, steve

[crxjarred]

ok i gess im guna shave the front normal and try to put some epoxy inside the crack without getten to much on the outside and i still wana find a way to make the rear fenders look meaner

[buck440]

i have my front and rears cut and in the front yah you will get muddler but once you cut them you'll see it's worth it and with the less weight you can just leave the crack just as is to show people how you ride:D or go to wal mart and get a yellow quart of oil and drip some of the plastic on her to fix it and with the rear i cut mine in thr bottom corner and you get the same amount of mud as you did before

[crxjarred]

whats better about haven shaved fronts and im waning to make my rear look like a 450r or rapter or somethen

[buck440]

what do you mean whats better? i they were cut in the first place it prolly wouldn't of cracked, looks way cooler, it's easier on the mounting tabs, won't get saggy and flop when in mud, when in woods less likely to get them scratched up or riped off, you can see your wheels which i think is a big plus for me when riding on fallen trees, rocks, ruts, ect and here is a picture of the rears cut.....NOT MINE

^ can you say sickness?

[crxjarred]

well i gess im going too cut them tomaro if i can it was rainen today but im guna cut the rear too if i can get to look right with tape so i prity much take a utility knife and cut it threw then take hi grit sand paper and smoth it off and im done

[justin1022]

man with shaved fenders you get soked i shaved my 440s but i dont even ride in water just track also when your driftin gravel roads you tend to get rocks in your legs lol. but i like it i hated the stock fenders they suck.

this is a pic of my quad shaved. and yes i no i need tires haha.

http://photos-b.ll.facebook.com/photos-ll-snc1/v317/207/50/594710550/n594710550_4023657_7169.jpg

[crxjarred]

lol those are good compaired to myn and i cant put some on untill i put a new moter in my car

[crxjarred]

ok got the front off today dont kno if im guan do the back yet but im still guna hit it with my air grinder when the crack drys i put shoo goo in it and had to hold it with the tape and stuff lol so it would lin up and dry right but i think there still a lil big so i might go smaller
before and with my suplys
http://i42.photobucket.com/albums/e346/crxjarred/meme001.jpg
got her taped up
http://i42.photobucket.com/albums/e346/crxjarred/meme002.jpg
heres the back
http://i42.photobucket.com/albums/e346/crxjarred/meme003.jpg
cut off from the front
http://i42.photobucket.com/albums/e346/crxjarred/meme004.jpg
cut off from the side
http://i42.photobucket.com/albums/e346/crxjarred/meme005.jpg
this is the crack just siten there
http://i42.photobucket.com/albums/e346/crxjarred/meme006.jpg
with its cast
http://i42.photobucket.com/albums/e346/crxjarred/meme007.jpg

[brian76708]

Originally posted by crxjarred

with its cast
http://i42.photobucket.com/albums/e346/crxjarred/meme007.jpg


haha nice hope it works i think its time for some new rear tires though.

[crxjarred]

yea i kno i just dont have the money as of now but will as soon as i put a moter in my honda crx cus its done gone to the car grave yard but thats the first on my ajenda after my moter proly just guna get some razers i like them

[brian76708]

Originally posted by crxjarred
yea i kno i just dont have the money as of now but will as soon as i put a moter in my honda crx cus its done gone to the car grave yard but thats the first on my ajenda after my moter proly just guna get some razers i like them

thats cool, it looks good though

[crxjarred]

thanks a lot i keep looken the back fenders over tryen to find a way to cut them but every way i like just takes all the strenth outa them sucks cus there huge lol

[justin1022]

hack em right off lol. no i was gona do mine to but i figured nah. there not to to bad i like that look anyway smalll fronts and bigger rears. you shaved yours alot like mine exept on the bottom by that rivet i shaved it right there across just under the rivet if you look at my pic.

[Dathon Lawler]

a good little trick a really old guy showed me.... drill a small hole right at the end of the crack and it will stop the crack from continuing. i did it to two of my cracks and it hasn't went anywhere from there. that was about two years ago.
and i wish i could show a pic of my quad. the person i got my quad from cut the front plastics in a way that you can overlay the cut fender on the shorty fender and re-attach if it's gonna be muddy and take off when it's just dirt. two bolts with flat phillips heads showing on top and that's all you see. it was pretty simple but i thought. ****. why didn't i think of that. still to this day haven't seen another like mine.

[DirtMonkey]

Hey Dathon, get some pics up of that body mod if you dont mind, I would like to check it out, sounds pretty sweet.

[ngates788]

serioulsy put some pics up of that... i originoally wanted to do something like that with mine before i hacked em but couldnt figure a decent way to do it.

[buck440]

now you gotta do that little bit in the back and your good to go, or get 50 dollars and put a 250r scoop on next like i did :blah:

[crxjarred]

all i have to say is wow makes the bike feel difrent and i love it havnt got it in the mud yet to see how bad it is but i can tell i alrety love it thanks for all your help guys

post pics when your done...

[crxjarred]

i will tomaro its dark right now lol