Carb Questions

[RCM]

i have some questions and i have read evrything on here i could find, guess i am just a little dense.

1. Who is the OEM manf of the 22mm carb that comes on the '07?

2. If i want to buy a new carb, i see they have 2 sizes the in then out. To upgrade what am I looking for?

3. Does the bracket that bolts the carb on to the motor come off of the old one, or do you have to buy a carb with the correct bolt on?

any help would be great.

[RCM]

this is from the performance faq

can anyone elaborate on what modifications need to be made?


20. I want/need more performance, but I dont feel like rebuilding the top end or even tearing it apart if everything internally is fine. I already have intake/ full exhaust/rejetted carb, what should I do?
The best (or most noticeable) modification you can do given the above situation would be to upgrade to a bigger carburetor. A bigger carb means more air, and more air mixed with more fuel means more power! The below carbs will fit all years of 250ex's with minimal modifications:

ATC200x carb- 24mm
XR200 carb- 26mm (all years EXCEPT the dual carb model)
DG carb for ATC200X/XR200- 27mm(?)

The following carbs will work with some modification:

300ex carb - all years

[hondariderdylan]

ask ryan or blaster eatin 250 or someone else on a pm
those guys know what up

[dirtdawg]

there's another thread that has all kinds of pics too. just gotta look. i'll find it.

[dirtdawg]

http://www.exriders.com/vbb/showthread.php?s=&threadid=296802&perpage=13&highlight=xr200%20carb&pagenumber=1

[RCM]

Thanks for the help. Great link.