Kill Switch

[cdoskocil9]

What Kill Switches will work?

Pro Design?

[Blizzard24]

If you are using a "Normally open" Switch like Pro Design or Pro Armor, you need to wire the kill switch to the key wires (Black and black/white).

If you are using a "Normally Closed" switch like : Pingle or Gunnar, you wire into the red kill switch on the bars.

TNT posted there are wires in the harness for the 09's, this is not found on the 08's so I am not sure which type of switch those wires are designed to work with.

I wired a Pro Armor switch to the key wires and it works perfectly and works in the same manner as the key (Going from "normally open" while the key is on to "Closed" which is the same as turning the key off)... basically grounding the loop to kill the engine.