no link help... bad

[woodsracer144]

okey... im running a no link PRP?Axis rear end. i need some help with settin it up... the shock is fully adjustable... but if i pick up the rear end and then let it just compress by it self how far should it got? then if if i compress the shock how far should i be able to push it down? if i put it down and just let go... the rebound is way too fast... its almost like its blown... what do you guys have the shocks set for with the rebound and compression....

also my swing arm has the mounting spot below the arm/ supports... i dont know what you call them...

its kinda like the swinger in the pic but there isnt a bend it it... its just straight...

[Honda 250r 001]

you need to adjust the rebound. or put some more air in the resivore. it should go down about an inch with no rider on it.

Have a nice day.
WH

[woodsracer144]

mine drops between 1 and 2 inches... its closer to 2 or more...

i also have a TON of cracks... there are 2 on each "arm" behind the hole that the shock mounts on, there were the normal ones (4, 2 i had to weld by the pivot bolt) and then there were some on the bottom of that bolt for the shock mount on both sides...

[woodsracer144]

so i checked on how much it drops... the grab bar is at 39 inches when i picked it up but i left the tires on the ground then i let it go down on its own and it went to 36... so would i have to do to not let it drop so much... i also saw this on the shock...

http://i374.photobucket.com/albums/oo185/mornin151/102_1799_00.jpg
http://i374.photobucket.com/albums/oo185/mornin151/102_1802_00.jpg