Do Your Recall

[andiboy123]

THIS IS WHAT HAPPEND WHEN YOU DONT KNOW NOTHING ABOUT RECALLS. HERE ARE PICS OF MY FLYWHEEL AND STATOR.

http://img.photobucket.com/albums/v497/ANDIBOY123/PIC-0001.jpg
http://img.photobucket.com/albums/v497/ANDIBOY123/PIC-0002.jpg
http://img.photobucket.com/albums/v497/ANDIBOY123/PIC-0029.jpg
http://img.photobucket.com/albums/v497/ANDIBOY123/PIC-0030.jpg

[bwkcobra03]

BRP should be paying for your stator and flywheel. It was caused by a recalled part that was on back order. My fly wheel bolts took almost 3 months to get.

[ride_red666]

i hav not heard of no recals? what year is it for i got an 08

[MarcM]

Check the Recalls Thread in this forum

[andiboy123]

i just spend $500 on a factory defect but by far the ds is the best fuel injector 450 yamaha is having a hole lot more issue

[Foxstar45]

Forgive my ignorance, but what does this recall prevent from happening exactly? It doesn't look like the squeeky clutch?

[andiboy123]

Originally posted by Foxstar45
Forgive my ignorance, but what does this recall prevent from happening exactly? It doesn't look like the squeeky clutch?
if you have an 08 ds model, the flywheel bolts, they get loose an eventually brake, then they fall in to the stator , you to your local dealer and ask them to replace them or go and get some forged bolts and replace them your self

[mebcop]

mine are at the dealer right now. this thread scared me into taking action. they already had the stuff to do it. unbelievable!

[andiboy123]

let my bd experience help you all , at least you have a decent dealer near you to help you, but tnt1 hook me up with marine world in kansas i pay for my repair but they where awsome

[cdoskocil9]

Stupid Question but how hard is to get to these bolts dont you just pull the right hand side motor cover and there they are???

[THEMACHINIST]

is it the 5 sprag bolt who get loose or it's the 3 stator retaining screws?:confused:

[TNT]

Yeah you pull the cover and there they are...has nothing to do with the stator screws. 6 sprag clutch screws not long enough nor torqued right from the OEM cause this. S/b loctite in might need a heat gun to get em undone. Need a oil pan, remove all the old gasket w/non-ferrous metal cleaner. You don't need to take the rotor off so you won't need a puller...just replace the screws with the right ones.

Need a new cover gasket too. Use loctite on stator cable grommet, tighten screws in a staggered sequence torque per bulletin.....Top engine w/oil.

[bigbad400]

Originally posted by andiboy123
i just spend $500 on a factory defect but by far the ds is the best fuel injector 450 yamaha is having a hole lot more issue


the KTM 450xc is the best. not an opinion either its fact, they have done tests in every aspect and can am is only second best next to KTM. the list goes on to yami and honda then the other crap out there.

[ProspectorJim]

Originally posted by bigbad400
the KTM 450xc is the best. not an opinion either its fact, they have done tests in every aspect and can am is only second best next to KTM. the list goes on to yami and honda then the other crap out there.

its kind of hard to be the best fuel injected quad with a carburetor... :chinese: