PDA

View Full Version : Snyder Raptor 250 Aluminum Air Box Kit



SMS
03-10-2009, 04:04 PM
HI here are the pics of the snyder air box and battery relocation kit. Let me know what you guys think

SMS
03-10-2009, 04:04 PM
2

SMS
03-10-2009, 04:05 PM
3

solty
04-03-2009, 07:19 AM
loos good. how soon until i can get one?

forgiven
04-03-2009, 09:58 AM
Depending on the price I would be interested. Assuming those are just rough examples. Most of your other stuff is nice so I would assume the same.

SMS
04-03-2009, 12:08 PM
yes this is proto type pieces I will try to get more pics thanks

SMS
04-03-2009, 12:08 PM
we will start making in the next 2 weeks, I want to take to track to test to make sure nothing hits

forgiven
04-03-2009, 12:45 PM
really interested in wet testing

bradley300
04-09-2009, 06:35 PM
Originally posted by forgiven
really interested in wet testing

i race xc so there will be plenty. racing loretta lynns GNCC, the IXCR xc race then another TN GNCC the last two weeks of april/first week of may so we will see how it goes.

forgiven
04-09-2009, 08:12 PM
Are you going to be testing it? If so I would like to PM you about jetting etc. and what you have done. Really interested to see how it works out for you.

bradley300
04-25-2009, 07:21 AM
i will be testing it at the IXCR race this weekend, we missed the Loretta Lynn's race Im not worried about the wet tho, the seat seals the top pretty well. I really cant help you with jetting tho, i have a bigger cam, high comp pison, and a 30mm FCR carb so my jetting is way different than stock. I think shawn did some dyno runs when the motor was stock w/ the airbox and gyt-r exhaust so he might be able to help

vondeister
04-27-2009, 12:16 PM
I might be intrested in one of these as well. I have a FCR 33 that I can seem to make work. I'm running the stock carb with it jetted way up. It runs really good.
I have several engine mods. it runs good with the stock carb. but i know its held back by this. I'm looking to sell my FCR 33 and maybe get a 30mm. the 33mm is new and only ran on the Dyno and a little testing.

I have a prodesign air filter and intake high comp. piston and web cam, ported and polished head and HMF full system.....I have a CT Racing full system as well, but run the HMF for now until further testing.

vondeister
04-27-2009, 12:47 PM
had to add the new sponsor to the signature.....