Help!!!! Taking Spindels Off

[trx250rforlife]

i got all the bolts tooken off but my a-arms wont come apart from the spindel is there any special way to take the a-arms off the spindel thanx

[alltorquedup]

If you are trying to get the ball joint studs out of the knuckle, I usually pry with a little force with a pry bar between the a arm and knuckle and at the same time hit the side of the knuckle with a hammer right where the ball joint stud goes through. They usually come apart pretty easy and don't rip the boot. I think they make a press like tool to pop ball joints loose, but I haven't had to use one yet.

[dunatic]

you just tap on the side of the knuckle where the ball joint stud goes thru. the shock/vibration of the hit will loosen the stud and it will fall out.