Log in

View Full Version : What the %#$ !!


DirtMonkey
03-07-2009, 07:28 PM
I bought a Moose parking brake block off and put new brake pads on the rear and now the block off plate wont go on without pushing on the metal rod that sticks out! Should I grind it down or get a new block of plate?
BossHogg420
03-07-2009, 07:29 PM
u should have had the block off on b4 the pad install...i wouldnt cut nothing down there....what is the piston coming out to far?
DirtMonkey
03-07-2009, 07:31 PM
I dont know Im pretty new at the whole atv deal so I am kind of feeling my way around via this site. Maybe the pads are to thick IDK?
Honda#4
03-07-2009, 07:44 PM
You have to file the rod down alittle to allow the pb cover to go on, I had to do the same thing.
DirtMonkey
03-07-2009, 07:56 PM
That is what I was thinking. Thanks
alberto
03-07-2009, 09:35 PM
before you file the rod I would see if the hole on your bp could use a little shave. Better to mess that up then the brake system. Just a thought. I have a WB BP and no fab needed.
03-07-2009, 09:49 PM
Originally posted by alberto
I have a WB BP and no fab needed.

a fellow brotherin lol Dont see too many WB blockoffs
BossHogg420
03-07-2009, 11:27 PM
yea or maybe you didnt compress the brake piston all the way in when u put the pads on and its keeping it from going back on right.
alberto
03-08-2009, 03:48 AM
FlewByU352,

best 19 bucks I spent, That thing takes a beatin. Cleans up nicely too.