PDA

View Full Version : picture of a 300ex with stock 400 aarms


hondaracing0144
03-02-2009, 09:09 PM
can i see a picture of 40ex aarms on a 300 cause i found a gut with 2 sets of 400 a arms and shocks for 100$
JohnT_98300EX
03-03-2009, 11:45 AM
Here is my 300 with 400ex lowers and 250r upper arms.
The 250r arms make it possible to correct the camber.
hondaracing0144
03-03-2009, 01:35 PM
but likke the 400 top aaarms will fit too
jsmay
03-08-2009, 12:01 PM
how much width does it add?
JParisi48
03-26-2009, 06:50 PM
like 2 inches
petryna
04-19-2009, 03:06 PM
Does anyone know what kind of A Arms these are? They are listed as aftermarket 400ex A Arms and they don't know what kind they are so I thought I would ask around. Thanks
IRISH-RACER-14
04-20-2009, 02:40 PM
look like lonestar..they have a star on it..im only guessing man
IRISH-RACER-14
04-20-2009, 02:41 PM
Originally posted by JohnT_98300EX
Here is my 300 with 400ex lowers and 250r upper arms.
The 250r arms make it possible to correct the camber.
what do u mean correct the camber
petryna
04-20-2009, 03:44 PM
Thanks kdigginz, I already found out that they are Lonestar Race Series A Arms.
JohnT_98300EX
04-20-2009, 10:29 PM
Originally posted by kdigginz
what do u mean correct the camber
with the 400ex upper and lower a arms the top of the tires will tip in.(negative camber) Way more than I was willing to put up with. It would "push" terrible. (start to turn in, then go straight)
By going with 250R uppers with adjustable ball joints I was able to correct this by adding shims to the ball joints. And this was way cheaper than after market a arms. If you can find them.
IRISH-RACER-14
04-23-2009, 12:40 PM
Originally posted by JohnT_98300EX
with the 400ex upper and lower a arms the top of the tires will tip in.(negative camber) Way more than I was willing to put up with. It would "push" terrible. (start to turn in, then go straight)
By going with 250R uppers with adjustable ball joints I was able to correct this by adding shims to the ball joints. And this was way cheaper than after market a arms. If you can find them. ok does +2 arms make a atv wider by 2 on each side or all together
QuadCobbler
04-23-2009, 02:22 PM
2" per side = 4" total
05-03-2009, 01:10 PM
those are lsr. i have the same ones for my kfx


Originally posted by petryna
Does anyone know what kind of A Arms these are? They are listed as aftermarket 400ex A Arms and they don't know what kind they are so I thought I would ask around. Thanks