air scoop pics

[zr7cat]

Post some pics of your air scoops, and where did you guys get em. thanks

[Pipeless416]

mine.. i got them from ace and added an hour or so of labor.. this one is kind of messed up, but they were a whole $12 to make. :)

[honda400ex2003]

can't get any shots now but mine are from ebay and were like 20 or 30 bucks. i had to bend the tabs the other way on the top to get them to fit though. Steve

[racerdan24]

Tinners....

[racerdan24]

2

[racerdan24]

3

[buck440]

far pic.....cdb scoops

[honda400ex2003]

Mine mount at the fender mounts at the top and bottom. It was kindof a pain to get the steel bar back in with the scoops on but the fenders are not going anywhere now. I think if I did it again I would just get some small bolts and nuts instead of using the stock hardware inside the scoops. When I go home I can take some pics for you. Steve

[raw67]

UM from Rocky Mountain Atv

[shawn3389]

mine from e bay
http://i239.photobucket.com/albums/ff186/shawn3389/Picture587.jpg

[honda400ex2003]

^^^ those are just like mine. how did yours fit? I had to bend the top mount all the way around to get it on top. Looks good with the fenders cut too. Mine are on still. steve

[shawn3389]

i had to trime mine a bit to fit right.....

[bbender85]

here's my latest project..

http://i154.photobucket.com/albums/s248/bbender85/quad/DSC04890.jpg

more to come. :cool:

[buck440]

wow, half carbon fiber half plastic side panels.......:eek2: :D

[honda400ex2003]

or the plastic scoops inside there? both are pretty cool, steve

[bbender85]

Originally posted by honda400ex2003
or the plastic scoops inside there? both are pretty cool, steve

yes, since thats what this thread is about. :D i've been meaning to do them for awhile now.. i'll get more pics when i have them totally done.

[honda400ex2003]

sounds good on the pics. Are they molded into the fenders like the 450r's and such(i believe, maybe not) or are they mounted seperate. Steve

[bbender85]

no, they are the fender extensions that come with maier plastics. i fabbed brackets for them.

[honda400ex2003]

cool, were the brackets easy to make? Steve

[bbender85]

yes, i will start a thread next week.

[Pabst_Powered]

Originally posted by racerdan24
Tinners.... I'm buying a pair of tinners this week and wondering about the fender mount hole, i noticed you have nothing going through there, is it a must for full fenders

[racerdan24]

The only reason for you seeing nothing going through the holes is because in 08,Honda changed the fender bracing so i did not have to run the bracing through the holes. I believe on 07's and back the bracing will go through the holes.

[trailrider894]

hey shawn3389 where did you get the hood from?? and is it for the 400ex or a 250r ?? or 450r??

[rinaldi]

I bought the UM from Rocky Mountain as well and my quad is an 06. I didn't re-install the fender support bracket since it didn't seen to want to fit and would look somewhat odd with that going thru the center of each scoop. Are the metal brackets suppose to be installed with these scoops?

Originally posted by rinaldi
I bought the UM from Rocky Mountain as well and my quad is an 06. I didn't re-install the fender support bracket since it didn't seen to want to fit and would look somewhat odd with that going thru the center of each scoop. Are the metal brackets suppose to be installed with these scoops?

I have the same scoops and there's no need for the brackets. the scoops give the fenders support, so no need + its cleaner.

[grassman]

um's from rocky mtn..... put em on today.

[BEAVER.989]

Anyone use PRM's scoops?

[storms400ex]

ive got them on mine, they're made real strong and look good to, not made cheap like some of the air scoops

[BEAVER.989]

Cool. Do you happen to have a picture?

[DirtMonkey]

Um from RM rattle canned black

[storms400ex]

i'll post some up when i go out later and take pictures

[Pabst_Powered]

just bought myself some tinners