PDA

View Full Version : ~~Help Me!!~~


90cc DAD
03-01-2009, 06:35 PM
Hey guys,
I have something wrong with a Blaster that I am trying to fix.
I have made a video so you can hear it and maybe help me
figure out what the problem is??
It will start and idle fine... But when I push the gas.. it just Blubbers and shuts off. it ran great and just lost all top end power.
Any suggestions??

Here is the video.
http://s346.photobucket.com/albums/p422/Tylersdad95y/Waldo/?action=view&current=003.flv

http://i346.photobucket.com/albums/p422/Tylersdad95y/Waldo/th_003.jpg (http://s346.photobucket.com/albums/p422/Tylersdad95y/Waldo/?action=view&current=003.flv)
90cc DAD
03-01-2009, 06:40 PM
I have cleaned the carb and Put a new spark plug in and didn't make any differance.
I am stumped!! Just thought someone might have had this same problem before?
wvspeedfreak
03-01-2009, 06:44 PM
Have you removed the TORS mechanism from it?
90cc DAD
03-01-2009, 06:45 PM
What is the TORS ?
Never heard of it.
wvspeedfreak
03-01-2009, 06:54 PM
It is the Throttle Over Ride System.It is that contraption located above the carb.It is designed to shut down the trottle in the event of a stuck WOT situation.They were notorious for causing problems on the Blasters.
RedneckRacing18
03-01-2009, 07:02 PM
My blaster did the sane thing and beleie it or not it was the reeds in it.
90cc DAD
03-01-2009, 07:12 PM
I noticed that big thing on top of the carb... But I'm not sure of what it is or how it works. I was afraid to do anything with it.

I did check the reeds and they are fine.
907Rider
03-01-2009, 07:12 PM
Could be your reeds, but its most likely your tors. have you done an mods lately? whats your jetting?
90cc DAD
03-01-2009, 07:18 PM
The only mods are a Jet kit and pipe.
Pretty much stock.

WvSpeedfreak... Is there a way to fix the TORS?
90cc DAD
03-01-2009, 07:19 PM
Originally posted by wvspeedfreak
It is the Throttle Over Ride System.It is that contraption located above the carb.It is designed to shut down the trottle in the event of a stuck WOT situation.They were notorious for causing problems on the Blasters.


What is the WOT?
wvspeedfreak
03-01-2009, 07:24 PM
WOT= wide open throttle.There are several companies that make a kit to get rid of the tors (Vitos maybe??).It consists of a new throttle cable and some other required pieces.I don't think they are real expensive.Maybe some of the Blaster guys on here could direct you to the best place to get one.
90cc DAD
03-01-2009, 07:26 PM
Is there a way to get rid of that thing?
Just buy a new carb and cable ??
wvspeedfreak
03-01-2009, 07:27 PM
I just googled tors eliminator kit and Motion Pro sells one for $28.
90cc DAD
03-01-2009, 07:51 PM
is there a way to fix the one that is on here??
Is there a chance that there is dirt in it... or is there
probably something broken?
deathcorefan2
03-01-2009, 07:56 PM
is the choke on? lol
my 400ex did that with the choke on...if not go ahead and do a TORS removal.
90cc DAD
03-01-2009, 08:02 PM
Double and triple checked the choke!!
I have never delt with the TORS before.
I was wandering if it is something I can take apart and clean up?
Or Maybe a ez fix?
907Rider
03-01-2009, 09:29 PM
Originally posted by 90cc DAD
Double and triple checked the choke!!
I have never delt with the TORS before.
I was wandering if it is something I can take apart and clean up?
Or Maybe a ez fix? You can just unplug it from the carb. http://www.blasterforum.com/showthread.php?t=655 The pics were removed but it gives you the idea.
90cc DAD
03-01-2009, 11:18 PM
That will help alot!!
But I'm alittle afraid to try without the pics
907Rider
03-02-2009, 01:27 AM
Originally posted by 90cc DAD
That will help alot!!
But I'm alittle afraid to try without the pics
Yea I understand. When the guy who created the thread got banned, he decided to be a a** and deleted the pics *sigh*. When I bought my blaster the tors had already been removed so I can't help out too much. But it seems pretty simple and lots of people have done it.
05LSR250R
03-02-2009, 05:54 AM
I've never owned a Blaster. My bud who works at the local dealer has had many people with the same problem. Buy the TORS eliminator kit. Also check your reed cage and gasket.
90cc DAD
03-02-2009, 09:47 AM
I have checked both and they are fine.
I'm pretty sure it is this TORS
I just wish there was a way to test it and find out.
ZeroLogic
03-02-2009, 10:36 AM
Do you have a shop manual for the bike? If not, definitely buy one. Well worth the money.:macho I have one for every machine I own. It breaks down every part of the machine and explains how to fix things and how they work.
XXX -rider
03-02-2009, 11:00 AM
Originally posted by 90cc DAD
What is the WOT?

omg thats funny!!

has the main jet been changed recently ..?
like while trying to "fix " it ?
extremeblastr
03-02-2009, 11:10 AM
first off, whether its the problem or not you should definitely get rid of the TORS setup. all 3 blasters i had we removed, it saves you work in the long run and it seems to run better without it. also don't forget that by removing that system you will now have to mix the gas instead of just using that lovely little tank yamaha throws on there for the mix (do yourself a favor and pull that off as well seeing as it will just be taking up space). if they doesn't fix it try changing out the cylinder head gasket, last time i worked on a blaster it was doing the same thing and changing the gasket fixed the problem.
90cc DAD
03-02-2009, 04:46 PM
Originally posted by XXX -rider
omg thats funny!!

has the main jet been changed recently ..?
like while trying to "fix " it ?


Dave,
Are you stalking me??
Every time I post something... You seem to be right there
and have something cocky to say.
XXX -rider
03-02-2009, 05:16 PM
:confused: huh? ..what?

I posted to help / asked a question in order to help
nothing cocky about that !~!!
seems like your letting your imagination get the better of ya .. ;)
90cc DAD
03-02-2009, 05:38 PM
I rest my case:rolleyes: