motox92
02-28-2009, 04:05 PM
4 thinngs I used were Razor blade,tape,sharpie,and sand paper(not shown)
The first thing I did was tape where I wanted to cut.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders006.jpg
Then I did a few light cuts and went through the plastic.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders008.jpg
Got the main chunck of the fender off.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders009.jpg
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders011.jpg
Did the same to the other side
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders012.jpg
Tools I used(missing sand paper)
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders013.jpg
Picture of it "sorta" done, still need to sand it to get it nice and smooth. Just wanted to show some pics how I did it.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders014.jpg
The first thing I did was tape where I wanted to cut.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders006.jpg
Then I did a few light cuts and went through the plastic.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders008.jpg
Got the main chunck of the fender off.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders009.jpg
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders011.jpg
Did the same to the other side
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders012.jpg
Tools I used(missing sand paper)
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders013.jpg
Picture of it "sorta" done, still need to sand it to get it nice and smooth. Just wanted to show some pics how I did it.
http://i298.photobucket.com/albums/mm270/lilpimpinkkidd_2008/cutfenders014.jpg