what carb

[riderssb250x]

im dointg a rebuild and i wana now what carb i should run i think the carbs a stock one it measures up like 34. something close to 5 its a kehin pj flatslide..

i have a boyseen radvalve, fmf fatty, powercore 2 silencer, cr250 headgastke, new boyseen reeds, k&n filter with no lid on box, .60 over bore

whats your advice like a 36 mm pj? or a 38 airstryker? let me know what you guys think

[Honda 250r 001]

38 strtker is what i would get.

[riderssb250x]

will my cable still work? and is it hard to mount up or will it mount right up?

[05LSR250R]

Boyessen makes a Rad valve boot for the 38mm carb.

[1promodfan]

I could be wrong but it may depend on what type of riding you're doing. I have a 36 pwk, and so far I like it. I was going to change to a 39 A/S, but I was told I would lose bottom end. So, I stayed with what I have. I mainly ride in the open, some trails and it works great.

[05LSR250R]

I have the 36mm PJ mated to a Rad Valve. Excellent from the bottom and in mid-range. I ride just about everything and it works well just about everywhere. Could use some top end for those bean field sprints! But I am very happy with the 36.

[riderssb250x]

which is cheaper?

[riderssb250x]

is a 38mm pj somethin to big ? i need good low and mid range and decent topend ill be in a alota trrails and alota open too

[86 Quad R]

if you have a porting that is for good low to mid the 38mm pj will work really well. although its a larger dia. carb it still has plenty of bottem pull. to help it a bit i'd run the compression up.

[snacob14]

http://www.exriders.com/vbb/showthread.php?s=&threadid=385378