PDA

View Full Version : A-arm bushing ?


ARMY_rider
02-23-2009, 06:29 PM
I need to replace my current a-arm bushings. I have removed all of them and was able to save a few of the bushings and all of the pins. Does anyone know where I can find the bushings for sale? I am not sure what brand of a-arms I have, but I can take measurements of the bushings for an exact size. PLEASE HELP ME IN TIME FOR THE DUNES!!!
250Rrebuild87
02-23-2009, 06:37 PM
i had lost one in process of rebuild i got one from the honda dealer for about 10 bucks that was the only luck i had
deathman53
02-23-2009, 06:56 PM
I got aftermarket a-arm bushings awhile ago. Delron plastic bushings and a metal sleeve to go inside. Pivot works sells a similar kit. Probably cheaper than oem also.
86 Quad R
02-24-2009, 06:42 AM
you need to post up a pic of the arms so we can help ya better but regardless there are bushings to be had for them. whether it be oem or aftermarket.
ARMY_rider
02-24-2009, 02:37 PM
A friend of mine seems to think that pretty much all bushings for aftermarket a-arms should work. Is this true?
ARMY_rider
03-07-2009, 07:51 PM
Ok so I order some bushing from superdaves and the part of the bushing that fits between the actual a-arm and the flange on the frame are too wide. I'm going to try to send them back. Does ANYONE have ANY suggestions for me here. I'm planning on going to the dunes in TWO WEEKS and I'm freakin out! PLEASE HELP ME!!!
05LSR250R
03-07-2009, 08:26 PM
Post pics!
250r__Ice
03-07-2009, 10:14 PM
These are the a arm bushing I use. Really like them, they do a good job.
http://www.atvbushings.com/id3.html
LONG-ROD
03-08-2009, 06:43 AM
these bushings will not fit on after market a arms the ends r to wide and the arm will not fit in the mount on the frame
Grande Huevos
03-08-2009, 08:24 AM
ur friend sounds like he knows his **** but without knowing what kind of arms u have its hard saying what u need. Post some pics dude!
Langbolt
03-08-2009, 03:57 PM
Look Here

http://www.buntingbearings.com/catalog_pages/powdered_metal_bearings.htm

Measure the outer diameter of your crush pin & the inner diameter of your A-arm.

I'm using the 5/8x3/4x1" flange bearings - part # EF101216

They're like a $1 ea.

They're self lubricating too!

:devil: