Fuel controller

[Hmf Ds450]

Where's a good place to put the fuel controller other than the air box

[maconu]

I took some foam out of my handlebar Pad (i'm running flexx bars so it is rectangular) and put the controller there. Hasn't caused any problems...

[Hmf Ds450]

what about in the hole where the tool kit goes

[maconu]

I know motoworks shoves it in one of the side areas next to the airbox. Like where the fuses sit....

Hows that for specific.... If you have a ds450 you'll know what I mean...

[Mr. Big Time]

Yup, if your looking down at the air box while standing behind the bike, there is a hole in the plastic on the left where the tool kit came, put it there with some foam or rags to keep it from bouncing around.

On the hand bars, thats seems a little weird. Then you can make adjustments while you ride. :D

[DGS]

This is were i put mine....on the subframe so i can take plastics off..

[ProspectorJim]

Originally posted by Mr. Big Time
Yup, if your looking down at the air box while standing behind the bike, there is a hole in the plastic on the left where the tool kit came, put it there with some foam or rags to keep it from bouncing around.

On the hand bars, thats seems a little weird. Then you can make adjustments while you ride. :D

the tool kit area fills with water in wet weather.

[DGS]

Originally posted by ProspectorJim
the tool kit area fills with water in wet weather.

I had the plastics pushing the buttons on the controller as well..!! Its a bit too tight in there.