PDA

View Full Version : Warrior problems...



motox92
02-21-2009, 05:43 PM
Heres the story....Rode my warrior for a few hours..in mainly mud. Came home washed it and road it around put it away for the night started it up again the next day no problems. Today..which is about 5 days later..started it up no problems idles but when about 3/8's throttle back fires like a ******. Replaced spark plug, cleaned air filter,and replaced gas..took carb off and very clean inside....sum up of story quad will not run after 3/8 throttle. Any help????? I really want to bypass the dealer. I also check all connections

keglassg
02-23-2009, 11:53 AM
if its backfiring, its probably loading up. check to make sure you have sufficient spark and have your stator tested. possibly the cdi also, but first, check the parking brake wiring. try putting the 2 wires from the parking brake together with a wire nut and see if that helps before you test the stator.

motox92
02-23-2009, 03:50 PM
Thanks, It was my parking brake wiring. Thanks

keglassg
02-23-2009, 05:01 PM
glad i could help buddy :)