View Full Version : running problems--- Help!
Renagade Dad
02-17-2009, 07:24 PM
1996 trx 90 Won't start with the choke, will start after 6-8 pulls with the throttle held wide open but then will not idle and die. I've had the carb off and cleaned it and the jets. When the engine warms up I've adjusted the idle and then it runs good but when it cools down I'm back to square 1. Any help would be appreciated.
lilman
02-18-2009, 07:47 AM
i would start with a compression check and spark plug
Renagade Dad
02-18-2009, 12:07 PM
Does any one know what the compression psi should be on this motor? I don't have a maintenance manual.
miniquaddad90
03-02-2009, 06:15 AM
Originally posted by Renagade Dad
Does any one know what the compression psi should be on this motor? I don't have a maintenance manual. .
The service manual says 178psi
lilman
03-02-2009, 09:58 AM
what?????????? are you sure that seems pretty high
miniquaddad90
03-02-2009, 01:05 PM
Originally posted by lilman
what?????????? are you sure that seems pretty high
It is a Cylmer manual......., never checked our comp before. It does seem high seeing that my Banshee had 200+psi last time I checked it. :D
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.