need help...fast

[optikid123]

ok i got a socket that was too small and wanted to see if it fited on my spark plug. it didnt go all the way down but the socket was short enough to let the tip of the plug come out the top where u would clip on the rachet. it spins but i cant find anything to get it off with and am felling really stupid. so what can i do???

and my 400 nevr came with a plug wrench and also the first thing im buying when i get this thing off

[JOEX]

You need an 18mm deepwell socket 3/8 drive.

Joe

[4TraxRider]

Get some needle nose pliers and try it. I guess the only other wasy it to take the tank and plastic off to get a better look at it/

[optikid123]

tank and plastic is all off the needle nose wont fit the gap it too small i still dont no what to do and i wanna ride a little tommrrow

[trxex]

i had same problem.go to sears buy 18 mm 3/8 drive plug socket.its around 4$$

[optikid123]

i know wher i gottaa go buy one but

how am i gonna get this thing off:(

[JOEX]

Originally posted by trxex
i had same problem.go to sears buy 18 mm 3/8 drive plug socket.its around 4$$
Works perfect:) (deepwell)

Joe

[JOEX]

The other socket is stuck?

Channel locks maybe? A magnet?:confused:

Joe

[trxex]

try to pry it up with a screw driver,maybe if you could break the plug the whole thing would come off??

[optikid123]

yea im thinkin now the best way to do this it to gently grind a little with my dremel until i can get it off