Fox Float Setup

[cdoskocil9]

Any Reccomendations of baseline settings for my Fox Floats up front?

Thanks

[ds450racer]

get your ride hight sorted out by putting air in to the main chamber. then go out and ride it and keep adding air or letting air out of the evol chamber. you cant set these up by the maunual. you can change the compression and rebounds on the nobs at the top and bottom of the shock.

[cdoskocil9]

I got the ride height dialed so now its just the evol..... what aout compression and rebound there has to be a click number thats good to start at.... Thanks

[ds450racer]

start in the middle setting of the clicks then work your way forward or backwards.

[cdoskocil9]

Thank You

[IOWAracer]

If you have DSC dont touch it get your ride height set and leave the Compression adjustments alone!

With the Dual speed adj. if everything isnt perfect its gonna sacrafice one shock for eather to soft or to hard..

My Knowledge of this comes from PRO GNCC racers!

[cdoskocil9]

How do you know if they came setup the same from the factory?

[ds450racer]

i cant see them being set up from the factory. Unless you gave them your weight. But even then , my shocks are set up for someone twice the weight of me to get them perfect.

[cdoskocil9]

Well I was curious so I checked them and they were not the same as soon as I get this thing ready its off to the track for some adjustments

[BSTURDIVANT]

Around 170 in the evol makes it turn better!
Around 10 out on rebound, 12 out on compression (high and low) is a good starting point!

[cdoskocil9]

Thank you very much what weight is that for I weigh 195 and I am setting it up for MX ....... So I can set the High and Low Compression to the same clicks Thanks Again.....

[cdoskocil9]

What do you meen by out? Would that be to the left or to the right from dead stop???

[cdoskocil9]

Anyone know which direction out is? Im guessing left?