getting rid of oil injection on lt 80

[ltrnutz43]

Does anyone know how to do away with the oil injection on an lt80, I would rather run premix, dont trust it, any help would be appriciated

[burcham400#39]

drain the oil out of the tank and cut the line and put a bolt in it , and just run premix thats how i did my littles girl's bike

[ltrnutz43]

i order the 20 dollar block off plate to get rid of it right, thanks for the input!

[etondaddy]

Originally posted by ltrnutz43
i order the 20 dollar block off plate to get rid of it right, thanks for the input!
Don't buy nothing.......remove the side cover and remove the oil pump drive gear on the crank....... done. And while your in there remove two rollers and lightin the clutch shoes to 180g. And take .030 off the head and then see how it runs. :eek2:


Mike Kozura

http://i58.photobucket.com/albums/g278/etondaddy/Kyles_80009.jpg

http://i58.photobucket.com/albums/g278/etondaddy/Kyles_80008.jpg

http://i58.photobucket.com/albums/g278/etondaddy/Kyles_80007.jpg

[LT80]

Eatondaddy is correct. You must remove the lil black plastic piece on the end of the crankshasft that drives the pump.
Imagine that pump turning w/o oil going thru it....:)

[etondaddy]

Originally posted by LT80
Eatondaddy is correct. You must remove the lil black plastic piece on the end of the crankshasft that drives the pump.
Imagine that pump turning w/o oil going thru it....:)
Thank you Ooo great lt80........I'm am not ready to snatch the clutch roller from your hand (and never will be you've spread a lot of knowledge through this board...thanks Jack)

I can see you sitting on the porch like a big papa bear watching his cubs play.....lol


Mike Kozura

[ltrnutz43]

cnt I just take the pump off and leave that gear on,,,isnt that what the block off plate is for?

[LT80]

That plate is for bling. :)

[cmskms]

Here's some BLING!! And for only 25 cents!! Haha

[ltrnutz43]

Awesome!!!!!!!!!!