Drtridr18
11-14-2001, 08:32 PM
I'm finally buying my very own 400 end of this month instead of borrowing. I'm having them put on a supertrapp IDSII pipe and a twist throttle at the dealer, but of course i want to do more as time goes on.
I'm going to get a flywheel advance key, and a K&N filter, would i be better off with an Edelbrock quicksilver carb, o the FCR, or how much difference will one of those make vs. a complete stock carb rejetting. I was leaning towards the edelbrock, for the fact that it has "external fuel circuit" making adjustments easier supposedly.
After the bike is well broken in and I'm comfortable with it, and after the bolt ons above, it will see an XR cam, and either a 416 or 440 big bore, 11;1 compression or so.
Speed is cool, but I'm into torque and throttle response. Which carb setup is right for me??
THANKS
I'm going to get a flywheel advance key, and a K&N filter, would i be better off with an Edelbrock quicksilver carb, o the FCR, or how much difference will one of those make vs. a complete stock carb rejetting. I was leaning towards the edelbrock, for the fact that it has "external fuel circuit" making adjustments easier supposedly.
After the bike is well broken in and I'm comfortable with it, and after the bolt ons above, it will see an XR cam, and either a 416 or 440 big bore, 11;1 compression or so.
Speed is cool, but I'm into torque and throttle response. Which carb setup is right for me??
THANKS