PDA

View Full Version : Chinese UTV


BuggyBananas
02-11-2009, 08:57 AM
Are (crap) chinese UTV questions recieved at all here, and if so where should I post.
Thanks in advance.
"new member"
scuzz
02-11-2009, 09:19 AM
Looks like a golf cart with a roll cage.
extremeblastr
02-11-2009, 09:24 AM
Originally posted by scuzz
Looks like a golf cart with a roll cage.

agreed lol.



but go ahead with the questions i'm sure someone can help you.
BuggyBananas
02-11-2009, 09:32 AM
Where?
extremeblastr
02-11-2009, 09:42 AM
right here is as good a place as any for now
BuggyBananas
02-11-2009, 10:06 AM
I'm having trouble figuring out how to adjust the chain, The Manual say's to loosen and slide the upper tensioner wheel down toward the chain, it has no adjustment left, nor does it look like the on in the manual picture. Could this be accomplished by replacing the mounting spacers or is that over the top rediculous, I would think it is, there has to be a better solution ???
derekhonda
02-11-2009, 11:00 AM
Dude there looks to be a ton of slack in that chain. It might be fully adjusted. I would take the adjustment way back out, remove a link from the chain, and then start the process over again.
Scro
02-11-2009, 11:20 AM
Or if it's that stretched out, you would probably be better off buying a new chain.
scuzz
02-11-2009, 11:29 AM
I bet the motor has slid back causing the slack.
05LSR250R
02-11-2009, 12:10 PM
If everything already mentioned doesn't work, you might be able to locate a larger diameter roller and put it on there. Just a thought.
BuggyBananas
02-11-2009, 03:01 PM
Ok, thanks. I think I'll try the roller. I don't see how the motor shifted by looking at the 8 mounts (4 on the motor and 4 on the rear) but it makes the most sence. The dam thing has been sitting in my garage for a month since I drove it last and the chain diden't slip before, just the gears did because the linkage was not right.

Also wondering if anyone has one of these...
05LSR250R
02-11-2009, 04:54 PM
do you think you can get a link out? Probably do the roller thing as a last resort.
BuggyBananas
02-11-2009, 06:49 PM
Yeah I'll try that, I took it for a ride to move my empty boat trailer and its still slipping in the transmission. Now I need gears.
Is there a battle ship around that would let me load this @#%& thing and fire it at china.
Where would I start in getting gears???