Clutch

[Da End]

anyone Know where i can get a clutch for my 250 for relitivly cheap.... mine kinda went bye bye....
http://i6.photobucket.com/albums/y204/hondarboy4/P2090007.jpg
http://i6.photobucket.com/albums/y204/hondarboy4/P2090005.jpg
obv my quad is nowhere near stock so anyone got a source of some good clutches that will handle "some" power by some i mean a good amount of power as nothing is stock...

[trx250rider]

there is nothing wrong with oem...some people run oem clutch and hinson components

[Da End]

so i could run oem and not blow the poop out of it? cuz this thing was dynoed at 58hp

[Honda 250r 001]

ive got a clutch for sale if you want it. the basket is a little rough but worked great. the rest of the parts are in GREAT condition. inner hub, pressure plate, and brand new tusk plates. Do you need pics? 58 hp? what ya got? big bore stroker?

[Honda 250r 001]

heresr the basket

[Honda 250r 001]

ok hers the basket haha

[C-LEIGH RACING]

Originally posted by Da End
so i could run oem and not blow the poop out of it? cuz this thing was dynoed at 58hp


Hold on just a minute, I aint finished rolling my britches legs up & I still got to git my rubber boots out the closet for you say anything else.
:D Neil

[05LSR250R]

HAHAHAHAHAHAHAHAHA!!! LITERALLY LAUGHING MY *** OFF!!

[C-LEIGH RACING]

Originally posted by 05LSR250R
HAHAHAHAHAHAHAHAHA!!! LITERALLY LAUGHING MY *** OFF!!

Easy now, kinda chill out.
Lets see what the deal is first.
Neil :p

[trx250rider]

Originally posted by Da End
so i could run oem and not blow the poop out of it? cuz this thing was dynoed at 58hp

i was being nice neil..lol

[86 Quad R]

get ya some new oem clutches. that'll do ya just fine ;) whilst in there check the spring height to the service limit to see if they need replacing too. :cool:

behave neil :p

[Da End]

lol this is just what i was told by the owner.. i personally have ridden it 3 times my brother has ridden it most (he is the one that blew it up) but from the storys i have been told by his racing buddys that were at a track the i visit. it has been dynoed at about 50... this was a backup quad for chris conden(the person that sold it to me) before he got sponsored by yamaha and his wife made him sell it to me for lets say cheap... esp when he showed me the recipts and it was all payed for by honda...

[8686]

58 hp?!?!? What are the specs on your engine? I'd put a crisp Benjamin on the table that it doesn't even make 48 hp. Probably honestly more like 38 hp. AND DO NOT TAKE OFFENSE TO THAT. I'm just saying it like it is, although I could be wrong. And please wash that thing...

[8686]

Oh, and put new Honda clutch parts in it.

[NJChris]

That hammer gives ya 10 extra HP

[T_Bag]

Looks like you took the clutch cover off without draining the oil.

[dunatic]

Originally posted by Da End
so i could run oem and not blow the poop out of it? cuz this thing was dynoed at 58hp

Not to burst your bubble.........but 58 rwhp out of a stock jug, in frame pipe on gas ? better get your dyno money back or I hope the crack pipe that came with it was free.

Even on a good day, bored and stroked to over 300cc, on alchy, drag ported running an OOF pipe you might see that.......and then it is a yearly rebuilder at best.

What I see there is a clutch that was ran too long, the basket grooved over time and probably tranny fluid that hasnt been changed in over a year.

File that basket smooth, drop in a new set of OEM fibers, run the steels over some 200 grit sand paper, new toomey springs and call it good. it should last you for many years if you changes out your fluids on a regular basis.

[1promodfan]

Originally posted by 8686
And please wash that thing...

^^^^^man you ain't right!! Honestly though, I was thinking the same thing!

[C-LEIGH RACING]

Originally posted by 1promodfan
^^^^^man you ain't right!! Honestly though, I was thinking the same thing!


Oh my goodness, we got clowns all over North Carolina cracking jokes,,,, :eek: :blah: :cool: :D
Neil