mkbruteforce
02-08-2009, 03:41 PM
I have a small electrical problem with my 05 450r. Both my fan and temp light are not working. Here is what I have done so far and nothing has helped.
Stock kill switch removed from bars as well as stock key switch.
Black and red wires from key switch spliced together and a pro armor teather kill switch is spliced into the green and black wires from the key switch, this works great. Motor start and shuts down.
Fan & Temp light: I have hook a 9v battery directly to the fan and temp light both work no problem so I know i have a good light bulb and Fan motor. I have checked all wires to the ICM for an open circuit none found. With the motor running I removed the wire from temp switch and grounded it to frame. Both the fan and temp light failed to turn on. I have also metered the voltage coming into the cannon plug for the temp light from the ICM whilt the bike is running and i have 0 volts.
Simply put; I am not getting power to my temp switch/light and Fan.
I am missing something? If my ICM where bad would the motor even run? Any help would be awesome.
Thanks
MK
Stock kill switch removed from bars as well as stock key switch.
Black and red wires from key switch spliced together and a pro armor teather kill switch is spliced into the green and black wires from the key switch, this works great. Motor start and shuts down.
Fan & Temp light: I have hook a 9v battery directly to the fan and temp light both work no problem so I know i have a good light bulb and Fan motor. I have checked all wires to the ICM for an open circuit none found. With the motor running I removed the wire from temp switch and grounded it to frame. Both the fan and temp light failed to turn on. I have also metered the voltage coming into the cannon plug for the temp light from the ICM whilt the bike is running and i have 0 volts.
Simply put; I am not getting power to my temp switch/light and Fan.
I am missing something? If my ICM where bad would the motor even run? Any help would be awesome.
Thanks
MK