D Bergstrom
02-07-2009, 05:52 PM
I am selling the following parts off my 2004 TRX450R, will fit 04/05 450R's, up to you to check if they will fit other years.
Houser swingarm, +1 1/4" length. Had two cracks near the linkage mount that were repaired back at the beginning of 2007. Swingarm was repowdercoated gloss black after welding. (Cracks were caused by the person who setup my rear shock using to short of a spring, was bottoming out the spring before fully hitting the bottom out bumper. Spring was changed before repairing swingarm.) Looks like on one side, another crack is starting next to one of the welds. As of right now, it just looks like the powdercoat has come off a little due to flex, as I can not see a crack. It made it through two years of hard desert racing, so not really surprised if it does crack again. Should be a simple fix for a welder to repair. $175 shipped.
Houser linkage. For use with the above swingarm. Linkage is straight, but does have a few scrapes and nicks on it. Good bearings. $75 shipped.
Stock front hubs. Good bearings and seals. $50 shipped for the pair.
If you give me a e-mail address, I can send you pics once I get the parts off. Will accept paypal only. Any questions, let me know.
Thanks,
Doug
Houser swingarm, +1 1/4" length. Had two cracks near the linkage mount that were repaired back at the beginning of 2007. Swingarm was repowdercoated gloss black after welding. (Cracks were caused by the person who setup my rear shock using to short of a spring, was bottoming out the spring before fully hitting the bottom out bumper. Spring was changed before repairing swingarm.) Looks like on one side, another crack is starting next to one of the welds. As of right now, it just looks like the powdercoat has come off a little due to flex, as I can not see a crack. It made it through two years of hard desert racing, so not really surprised if it does crack again. Should be a simple fix for a welder to repair. $175 shipped.
Houser linkage. For use with the above swingarm. Linkage is straight, but does have a few scrapes and nicks on it. Good bearings. $75 shipped.
Stock front hubs. Good bearings and seals. $50 shipped for the pair.
If you give me a e-mail address, I can send you pics once I get the parts off. Will accept paypal only. Any questions, let me know.
Thanks,
Doug