ww228king
02-03-2009, 09:48 AM
Ok guys....and gals. Here is what I have. As some of you may already know that I got a halfway running 2000 Monsoon 90cc month ago and my son and I have stripped it down. I have saved alot of parts from the engine for back up stuf. (never know when you might need that part between the motos...)
I have some stuff left over that I don't need and want to offer it here. I had someone PM me a few weeks ago about the engine, but I have cleaned out my PM box and don't remember who you were... Sorry.
This engine is just like a normal Jog engine, but there is a difference that I did not like and you guys might still can use it. It did not have any allen bolts on the engine, they use phillups head bolts that are very hard to break lose. The engine has Sundiro markings all over it.... on the crank rod, intake boot, and other places... It will need a new crank seal on the variator side of the engine....The topend went to TGCHEESEMAN along with the cylinder studs. I have took the front and rear pullies, clutches, variator, and ect off so all you have is the two shafts clean. I have took the starter and the clutch cover off also.
Pics will be posted tonight after work.... Shipping is from 27807
The engine case comes with a 19 tooth pline sprocket, flywheel, 42mm crank, stator, and rear gears.
$25 plus shipping & packaging
I have the oil injector that came off this same engine, but will need new hoses.
$5 plus shipping & packaging
An oil tank, but not sure if you can use it on any other types of ATVs.
$5 plus shipping & packaging
CDI is the small type.
$10 plus shipping & packaging
Regulator
$5 plus shipping & packaging
Left over Stock Polaris 90 Cylinder and Piston... may need honed and new rings
$10 plus shipping & packaging
Monsoon Plastics and Seat
$20 plus shipping & Packaging
Fan
$5 plus shipping & packaging
Air Box
$5 plus shipping & packaging
Top end and fan shrouds
$10 plus shipping & packaging
Will make package deals.
I have a box full of other mics parts that you might can use, just ask. I have the stock plastics/seat and steering stem off the quad and will be letting the rear end and front end go soon, just need it right now to roll around. I will be keeping two of the tires and wheels for a local down the road, but the other two can go.
I have some stuff left over that I don't need and want to offer it here. I had someone PM me a few weeks ago about the engine, but I have cleaned out my PM box and don't remember who you were... Sorry.
This engine is just like a normal Jog engine, but there is a difference that I did not like and you guys might still can use it. It did not have any allen bolts on the engine, they use phillups head bolts that are very hard to break lose. The engine has Sundiro markings all over it.... on the crank rod, intake boot, and other places... It will need a new crank seal on the variator side of the engine....The topend went to TGCHEESEMAN along with the cylinder studs. I have took the front and rear pullies, clutches, variator, and ect off so all you have is the two shafts clean. I have took the starter and the clutch cover off also.
Pics will be posted tonight after work.... Shipping is from 27807
The engine case comes with a 19 tooth pline sprocket, flywheel, 42mm crank, stator, and rear gears.
$25 plus shipping & packaging
I have the oil injector that came off this same engine, but will need new hoses.
$5 plus shipping & packaging
An oil tank, but not sure if you can use it on any other types of ATVs.
$5 plus shipping & packaging
CDI is the small type.
$10 plus shipping & packaging
Regulator
$5 plus shipping & packaging
Left over Stock Polaris 90 Cylinder and Piston... may need honed and new rings
$10 plus shipping & packaging
Monsoon Plastics and Seat
$20 plus shipping & Packaging
Fan
$5 plus shipping & packaging
Air Box
$5 plus shipping & packaging
Top end and fan shrouds
$10 plus shipping & packaging
Will make package deals.
I have a box full of other mics parts that you might can use, just ask. I have the stock plastics/seat and steering stem off the quad and will be letting the rear end and front end go soon, just need it right now to roll around. I will be keeping two of the tires and wheels for a local down the road, but the other two can go.