houser 250r a-arm bushings

[ovalracer44]

i need some help finding a rebuild kit or the parts to rebuild my houser a-arms. i need the bushings and inserts that go in the a-arms where they bolt to the frame. any and all help is appreciated. i have looked on the houser website and emailed them with no answer and no luck locating them for now. i have a houser 250r geometry frame with +3+1 lt a-arms and the a-arms have the plastic inserts with a steel bushing in them. thanks, for any and all help.

[voodoochassis]

mine used factory 250r bushings

[jrspawn]

All of my Long travel houser arms ive had for the houser chassis(400ex style arms) take two needle style bearings, two seals, and a sleeve. Call them up and let them know what your looking for.

Thank you
Justin

[MossboysRacing]

maybe try Herrmann racing. My Herrmann arms anent LT, but they do have the derlin bushings with the steel sleeve. They might be able to help you out

[headstrong]

I have ran into the same thing, houser offers the needle type bearing replacement that come with bearings, seals and sleeves. Houser does not use the "DELRON" type bushings anymore. But a Stock set of bushings and sleeves will fit the a-arms that you have. You can get the bushing kits just about any where for about 60 to 80 bucks. I have even seen some type of bronze busings I suppose they last longer but not sure. The kit houser offers are around 140 for everything.