from the old school and open minded

[86 Quad R]

i'm am soooo not up on all this new technology but i am openminded to it non the less. my question is..........

if i were to switch to a 13:1, add next size up exhaust valves, add the aftermarket intake cam and top it all off with a port job and run an open air box. will the computor be able to adjust for it or what.

thanks in advance. all input welcome. :cool:

[joecrack85]

no it would not. the fuel injection system is a closed loop system that will not make adjustments based on upgrades. it will only adjust for elevation. cars use an open loop fuel injection that allows it to adjust for more air/fuel based on upgrades. for those up grades you will need a power commander or equivalant. the cherry bomb wont do

[86 Quad R]

do you have a source for the power commander?

[Danny Ray]

pm sent

[86 Quad R]

thanks danny. :cool:

[Danny Ray]

let me know what you get

[scuzz]

I suggested in another thread fuelmoto, they are very nice and knowledgeable.

fuelmoto.com

[86 Quad R]

Originally posted by scuzz
I suggested in another thread fuelmoto, they are very nice and knowledgeable.

fuelmoto.com

no luck with that. :(

[scuzz]

Where did you purchase your PCIII from?

[86 Quad R]

i havent............... thats where i'm headed with this thread. trying to educate myself on the mapping system for the listed mods ----^ ;)

[witech]

Doesnt suzuki have a factory tuning tool? Hard to believe they build all quads with a generic map.
On the other hand a power commander is simple to use and adjust .

[scuzz]

Originally posted by 86 Quad R
i havent............... thats where i'm headed with this thread. trying to educate myself on the mapping system for the listed mods ----^ ;)


Ah, I understand. With the people I mentioned, you tell them what you have and they tailor a map to fit you best. Now that said they aren't always spot-on due to the lack of a dyno, but they would most likely come close.

Hopefully someone here already has a similar setup and wouldn't mind sharing their map with you.

[86 Quad R]

yea that would be cool....


have a direct link to them? i searched fuelmoto and didnt get anywhere with it.

[scuzz]

I'm posting this link to mess with you, so please don't take offense:

http://tinyurl.com/da5do3

(I googled it for you)


:D

[86 Quad R]

baaaaa ha ha ha! smartazz!!! :p thats one of the sites i had gotten in my search. appreciate it dude. :cool:

[scuzz]

No problem!

Hey, where are you near in Mississippi? I have family in Carriere (between Hattisburg and Picayune) and bring my quad with me when I go. Maybe we could hook up and go riding?

[86 Quad R]

i'm about 1/2 way between jackson and brookhaven. yea that wold be cool. what type o riding yall do most of?


btw: i just wanted to thank everyone for the input. im now headed in a good direction. no more walking in circles. lmao now i'll need to hit the ole lady up to borrow her laptop. :eek2:

[scuzz]

e-v-e-r-y-t-h-i-n-g but mud.


I like the Sand over in Wiggins, MS at sandhillatv

www.sandhillatv.com

[86 Quad R]

i been wanting to go there. i've heard plenty good about it. and it aint that far from ne either. i'm no fan of mud either:ermm:

[scuzz]

It's a lot of fun. I'd get some paddle tires before going out there otherwise you'll get frustrated a lot.

[86 Quad R]

yuppers. i know too well about paddles. i frequent the creeks en sand bars.

[scuzz]

Creek riding is so much fun. (when it's warm)

It just eats your pads something awful.

[86 Quad R]

roflmao yea its deffinately seasonal. i dont even look at a creek when its less than 85^ out and even then it must be sunny.

[FoxMxRiders]

Originally posted by witech
Doesnt suzuki have a factory tuning tool? Hard to believe they build all quads with a generic map.
On the other hand a power commander is simple to use and adjust .

Yoshimura PIM and Fimak

[86 Quad R]

ended up going with fuelmoto. fast turn around and he loaded the PC III with a map to the mods and all. great folk to deal with. thanx scuzz. :cool: